ASTMHTE-19.200MHZ-ZR-E-T

ASTMHTE-19.200MHZ-ZR-E-T is a type of oscillator widely used in fields such as computers, communication equipment and radio frequency (RF) applications. An oscillator is an electronic device that produces an alternating current (AC) under certain conditions, and is capable of being used as either an electronic or a mechanical frequency-determining element. Oscillators are used to maintain a stable output frequency in order to ensure the proper operation of the circuit components.

The ASTMHTE-19.200MHZ-ZR-E-T oscillator has a 100 MHz to over 500 MHz frequency range, a typical frequency stability rate of 0.1ppm to 1ppm, and a noise level of -118dBc/Hz. It is designed to operate in a wide temperature range, from -40 to +85 degrees Celsius. It is also resistant to environmental factors such as moisture, vibration, and ESD. Due to its reliable performance, the ASTMHTE-19.200MHZ-ZR-E-T oscillator is widely used in many commercial and industrial applications.

The ASTMHTE-19.200MHZ-ZR-E-T oscillator is a type of voltage-controlled oscillator (VCO), which means that it is capable of generating a frequency that is proportional to the input voltage level. This oscillator contains a device called a voltage-controlled crystal oscillator (VCXO), which is a type of crystal oscillator whose output frequency can be adjusted by varying the voltage level. This is achieved by changing the capacitance of the connected quartz crystal, which is determined by the applied voltage.

The ASTMHTE-19.200MHZ-ZR-E-T oscillator uses a push-pull oscillator circuit consisting of two N-type MOSFET transistors in a cross-wired configuration. The input voltage is applied across the two transistors, and this causes the non-inverting transistor to be turned on and the inverting transistor to be turned off. This creates an oscillating signal, and the frequency of the output signal is determined by the capacitance of the quartz crystal. As the input voltage is changed, the capacitance varies, and this results in a change in the output frequency.

The ASTMHTE-19.200MHZ-ZR-E-T oscillator is widely used in a variety of applications, such as radar and navigation systems, radio and television broadcasting, and other high-frequency communications. It is ideal for applications where reliable and stable frequency control is necessary, such as in radio receivers and transmitters, medical diagnostic imaging systems, and satellite communication systems. The input voltage of the oscillator can be changed to adjust the output frequency, allowing for precise control of the frequency.

Overall, the ASTMHTE-19.200MHZ-ZR-E-T oscillator is an ideal choice for applications requiring precisely controlled and reliable frequency output. It is highly reliable, and its frequency range of 100 MHz to over 500 MHz makes it suitable for a variety of applications. Its push-pull oscillator architecture allows for excellent noise suppression and excellent temperature stability. The ability to adjust the output frequency by changing the input voltage makes this oscillator ideal for applications requiring precise frequency control.