ASTMHTFL-20.000MHZ-ZJ-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ASTMHTFL-20.000MHZ-ZJ-E-T3 oscillator is a type of oscillator used in a number of applications. Oscillators are electronic devices that generate an alternating current or voltage waveform without the need for an external electrical power source. They are often used in circuits where a reliable repetitive waveform is required, such as an audio amplifier or radio transmitter. The oscillator is capable of producing a waveform at a frequency of up to 20.000 MHz.

The ASTMHTFL-20.000MHZ-ZJ-E-T3 oscillator is based on the Pierce oscillator circuit, which is a type of feedback oscillator circuit. In this circuit, an amplifier, usually a transistor, is connected to a parallel resonant tank circuit with a capacitance C1 and inductance L1. The tank circuit is connected to the input of the amplifier, which is then fed back to the output through a capacitor C2. The tank circuit acts as an output filter to select the desired frequency. The output of the amplifier is connected to the load, which in most cases is an electrical circuit requiring a stable, repetitive waveform.

The operation of the Pierce oscillator circuit is based on the concept of negative feedback. The gain of the amplifier is such that when the output of the amplifier reverses polarity, the gain of the amplifier is reduced. This causes the output waveform to be repetitive and with an amplitude determined by the initial conditions of the components. The frequency is determined by the LC values of the tank circuit, and the waveform is determined by the type of amplifier used.

In addition to producing a steady frequency waveform, the ASTMHTFL-20.000MHZ-ZJ-E-T3 oscillator also provides a means of controlling the frequency. This is done by adjusting the capacitance of the tank circuit, which adjusts the LC ratio and, consequently, the frequency of the output waveform. This makes the oscillator ideal for applications where a wide range of frequency control is required.

The ASTMHTFL-20.000MHZ-ZJ-E-T3 oscillator is commonly used in radio electronics. It can be used to generate the carrier wave for a radio transmission, as well as to stabilize the frequency of an oscillator circuit. It is also often used in digital electronics to produce a clock signal for a microcontroller or other digital circuit. In addition, it can be used in audio electronics as a frequency generator for audio effects units.

The ASTMHTFL-20.000MHZ-ZJ-E-T3 oscillator is an extremely versatile and reliable device which can be used in a variety of applications. From radio electronics to digital electronics, it can provide a stable, repetitive waveform for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference