ASTMHTFL-48.000MHZ-AC-E-T

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	48MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

The ASTMHTFL-48.000MHZ-AC-E-T is a type of oscillator, which is an electronic device that generates a stable and periodic output signal. It is commonly used for timing, control, and signal transmission applications. This article discusses the application field and working principle of the ASTMHTFL-48.000MHZ-AC-E-T oscillator.An oscillator is an electronic circuit that produces a continuous and alternating voltage, current, or other form of output. It is used to maintain or control a specific frequency. Oscillators can be divided into two categories – linear and nonlinear. Switched-mode oscillators are a form of nonlinear oscillators. ASTMHTFL-48.000MHZ-AC-E-T is a switched-mode oscillator, which utilizes a fixed frequency to generate a periodic waveform.The ASTMHTFL-48.000MHZ-AC-E-T oscillator is most commonly used in radio frequency (RF) and data rate designs. In these applications, the oscillator frequency is determined by the design specifications of the circuit. It is designed to generate the required frequency with high accuracy and extremely low jitter. The oscillator is also designed to ensure minimum phase noise. These features make the ASTMHTFL-48.000MHZ-AC-E-T oscillator an ideal choice for use in RF signal generation, data rate calculations, and clock synchronization.The ASTMHTFL-48.000MHZ-AC-E-T oscillator works by using a small Direct Current (DC) voltage to produce an output signal at a specific frequency. It relies on an oscillator circuit made up of three components – an amplifier, an electronic switch, and a capacitor. The capacitor is charged and then discharged in a periodical fashion as electronic signals are passed through it. This results in an AC signal output at a set frequency, which is determined by a combination of the components’ specifications.The ASTMHTFL-48.000MHZ-AC-E-T oscillator is typically used in applications where it is necessary to accurately generate a signal with specific characteristics. This includes communication systems, radio transmitters, receivers, radar systems, and measurement instruments. The oscillator is also used in audio devices, such as sound cards and speakers, as well as other consumer electronics.In conclusion, the ASTMHTFL-48.000MHZ-AC-E-T oscillator is a type of switched-mode oscillator designed for use in RF and data rate designs. It is capable of providing accurate frequency outputs with minimal jitter and phase noise. This makes the ASTMHTFL-48.000MHZ-AC-E-T oscillator an ideal choice for applications where accurate signal generation is essential.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description