ASTMHTV-10.000MHZ-ZC-E-T

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-55°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	10MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit or device that produces an alternating current (AC) voltage of a specific frequency. Oscillators are used in a variety of applications, including radios, television, cell phones, computers, and networking equipment. Oscillators are also used in audio systems to generate low-frequency tones for use in telephone systems, as well as in timekeeping systems and other applications.The ASTMHTV-10.000MHZ-ZC-E-T oscillator is a highly efficient voltage-controlled oscillator (VCO) with low power consumption. It operates in the frequency range from DC to 10 MHz and has a wide range of circuit configurations, ranging from single ended to differential output. The chip is typically used in communication systems, with its small size and high performance characteristics making it ideal for these applications.The chip is designed to be used in applications where different signals need to be generated at different frequencies. It has been specifically designed to meet the requirements of the modern communications systems such as TV and cellular phone systems, which rely on frequency hopping.The ASTMHTV-10.000MHZ-ZC-E-T oscillator uses a differential amplifier circuit to generate the alternating electric signal. The voltage is fed to two pins on the chip and these pins are connected to the resistor and capacitor elements on the chip. The inverting side of the differential amplifier is connected to a ground pin and the non-inverting side is connected to the reference voltage.The reference voltage controls the frequency of oscillation of the chip. This is done by the use of a voltage controlled variable resistor, or a potentiometer, which is connected to the differential amplifier output. The potentiometer allows the frequency of the signal to be adjusted accordingly.The oscillation frequency of the chip is also determined by the combination of the resistor and capacitor elements. The combination of these components is designed to provide a good tuning range while minimizing the power consumption of the chip. The chip also has low phase noise properties, which ensures that it will be able to produce clean signals even when operating in the higher frequencies.Another important feature of the ASTMHTV-10.000MHZ-ZC-E-T oscillator is its wide gain range. This is important in order to generate signals of different frequencies. In addition, the chip has a high input impedance, which means that the output frequencies can be adjusted to accommodate the various applications in which the chip can be used.Overall, the ASTMHTV-10.000MHZ-ZC-E-T oscillator is a highly efficient, low power consuming VCO with a wide range of applications. It is ideal for communications systems as well as audio systems, for producing both low-frequency and high-frequency signals. With its capabilities, this chip is considered to be an ideal choice for modern communication and audio systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description