ASTMHTV-80.000MHZ-XK-E

Frequency Stability:	±30ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 105°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	80MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>Oscillators are a type of electronic equipment that works by producing an alternating electric current or voltage of a certain frequency continuously. The ASTMHTV-80.000MHZ-XK-E is a type of oscillator that is specifically used for high frequency applications. It is a multi-mode oscillator available in two different versions - with and without an output amplifier.</p><p>This oscillator has a range of features that make it ideal for applications where high frequency accuracy and low phase noise are required, such as in radio frequency measurement, broadcast, biomedical, and astronomy. It has an input voltage range of 5V to 18V, a maximum frequency of 80.000 MHz, a frequency accuracy of 0.2% and a typical phase noise of -130 dBc/Hz at 10 KHz offset. It is also capable of producing output powers up to +10dBm.</p><p>The working principle of the ASTMHTV-80.000MHZ-XK-E oscillator is based on a negative resistance oscillator stage. It works by creating a voltage feedback loop, which amplifies the AC signal by an amount that is dependent on the feedback resistors. This feedback increases the gain of the oscillator circuit and causes it to oscillate at a specific frequency. The oscillator is then tuned to the desired frequency by adjusting the values of the feedback resistors.</p><p>The ASTMHTV-80.000MHZ-XK-E oscillator is designed to be used in a variety of applications, including RFID, medical, laser, and broadcast applications. It is used in RFID tags to store and retrieve data from transponders. It is also used to drive high-power lasers for medical applications such as laser eye surgery. In broadcast applications, it is used to generate a carrier wave for the transmission of radio and TV signals.</p><p>In conclusion, the ASTMHTV-80.000MHZ-XK-E oscillator is a type of electronic equipment that works by creating a voltage feedback loop to generate an alternating current or voltage of a specific frequency. It is designed for applications where high frequency accuracy and low phase noise are required and is capable of producing output powers up to +10dBm. This oscillator is used in a variety of applications, including RFID, medical, laser, and broadcast.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description