ASTMUPCD-33-25.000MHZ-EJ-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

The ASTMUPCD-33-25.000MHZ-EJ-E-T3 is a type of oscillator used in various technologies and applications. It is a general purpose oscillator that is often used as a reference for various electronic components. Oscillators are electronic components designed to produce a certain type of electrical waveform in a predictable manner. These oscillators are often used in radio, television, and even computer systems.

The ASTMUPCD-33-25.000MHZ-EJ-E-T3 oscillator is based on a quartz crystal, which is a natural mineral that vibrates at a constant, predictable frequency. This crystal is connected to an amplifier and other components to amplify, shape, and adjust the frequency of the waveform. This oscillator has a frequency of 25.000 MHz which is the most common frequency used in the radio, TV, cellular, and various other communication networks.

Applications of the ASTMUPCD-33-25.000MHZ-EJ-E-T3 oscillator are wide and varied. This oscillator is commonly used in communication devices such as cellular phones, radios, and televisions. It is also used in electronic circuits as a reference oscillator. This oscillator is also used in GPS receivers, radar systems, and flight control systems. Additionally, it is used in measurement equipment, frequency control systems, and digital-to-analog converters.

Two of the most common uses of the ASTMUPCD-33-25.000MHZ-EJ-E-T3 oscillator are frequency synthesizers and clock oscillators. Frequency synthesizers use the oscillator to create multiple frequencies from a single reference frequency. Clock oscillators use the oscillator to provide a reference frequency that is used to synchronize digital signals and clocks. This oscillator is also used in oscilloscope probes, signal generators, and test and measurement equipment.

The ASTMUPCD-33-25.000MHZ-EJ-E-T3 oscillator works on the principle of electromagnetic induction. This oscillator generates a RF signal using a quartz crystal. The quartz crystal is connected to an amplifier which amplifies and shapes the signal before it is output. Additionally, the oscillator can be adjusted to produce frequencies within a range of +-6.5 or +-2.5 percent. This makes it possible to generate a signal with a highly precise frequency.

In short, the ASTMUPCD-33-25.000MHZ-EJ-E-T3 oscillator is a quartz crystal-based oscillator that is used in various technologies and applications. It is a general purpose oscillator that is often used as a reference for various electronic components. This oscillator works on the principle of electromagnetic induction and produces a signal with a frequency of 25.000 MHz. It is primarily used in communication devices such as cellular phones, radios, and televisions and is also used in electronic circuits as a reference oscillator. Additionally, it is used in oscilloscope probes, signal generators, and test and measurement equipment.

The specific data is subject to PDF, and the above content is for reference