ASTMUPCV-33-25.000MHZ-LJ-E-T

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	31mA
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	36mA
Operating Temperature:	-40°C ~ 85°C
Series:	ASTMUPC
Voltage - Supply:	3.3V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	25MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to ASTMUPCV-33-25.000MHZ-LJ-E-T Oscillator

An ASTMUPCV-33-25.000MHZ-LJ-E-T oscillator is an electrical device which is used to generate a periodic signal with a predetermined frequency. It is part of a family of devices known as oscillators, and its basic function is to convert direct current (DC) power into an alternating current (AC) signal.

Applications of ASTMUPCV-33-25.000MHZ-LJ-E-T Oscillator

The ASTMUPCV-33-25.000MHZ-LJ-E-T oscillator is a versatile and useful device for a variety of applications. Generally speaking, it is used to provide an accurately-controlled AC voltage or current source. Common applications include frequency synthesis, clock and signal generation, test and measurement systems, and motor control. It is also used in electronic circuits to generate a signal of a specific frequency, or to stabilise the frequency of a signal.

Types of ASTMUPCV-33-25.000MHZ-LJ-E-T Oscillator

There are several types of ASTMUPCV-33-25.000MHZ-LJ-E-T oscillators available. The most common types are LC (inductance-capacitance), RC (resistance-capacitance), and RLC (resistance-inductance-capacitance) circuits. The type used will depend on the application and requirements.

Working Principle of ASTMUPCV-33-25.000MHZ-LJ-E-T Oscillator

The basic operation of the ASTMUPCV-33-25.000MHZ-LJ-E-T oscillator is that of a gain-controlled oscillator. The input signal is amplified as it passes through the device and then fed back to the input. This creates a regenerative feedback loop, which causes the oscillator to oscillate at a frequency determined by the characteristics of its components.When an external signal is applied, the phase of the oscillator will remain constant. The output frequency is then determined by the series or parallel resonant frequency of the device. This can be adjusted by varying the capacitance, inductance, or resistance of the oscillator’s components, as needed for different applications.

Conclusion

In conclusion, the ASTMUPCV-33-25.000MHZ-LJ-E-T oscillator is an important and versatile electrical device which is used to generate an alternating current signal with a precise frequency component. These devices are available in a variety of types and can be used for a variety of applications. Their working principle is based on gain-controlled oscillation and the output frequency is determined by the series or parallel resonant frequency of the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description