ATA6563-GAQW1

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

The ATA6563-GAQW1 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical Two-Wire CAN bus. The transceiver is designed for high-speed (up to 5 Mbps) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved electromagnetic compatibility (EMC) and ESD performance as well as features such as: Ideal passive behavior to the CAN bus when the supply voltage is off. Direct interfacing to microcontrollers with supply voltages from 3V to 5V (ATA6563). Three operating modes together with the dedicated fail-safe features make the ATA6563-GAQW1 an excellent choice for all types of high-speed CAN networks, especially in nodes requiring Low-Power mode with wake-up capability via the CAN bus.

2. Features

    1. Fully ISO 11898-2, ISO 11898-2: 2016 and SAE J2962-2 Compliant

    2. CAN FD Ready

    3. Communication Speed up to 5 Mbps

    4. ISO 26262 Functional Safety Ready

    5. Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)

    6. Differential Receiver with Wide Common-Mode Range

    7. ATA6562: Silent Mode

    8. Remote Wake-Up Capability via CAN Bus - Wake-Up on Pattern (WUP), as Specified in ISO 11898-2: 2016, 3.8 µs Activity Filter Time

    9. Functional Behavior Predictable under All Supply Conditions

  10. Transceiver Disengages from the Bus When Not Powered Up

  11. RXD Recessive Clamping Detection

  12. High Electrostatic Discharge (ESD) Handling Capability on the Bus Pins

  13. Bus Pins Protected Against Transients in Automotive Environments

  14. Transmit Data (TXD) Dominant Time-Out Function

  15. Undervoltage Detection on VCC and VIO Pins

  16. CANH/CANL Short-Circuit and Overtemperature Protected

  17. Fulfills the OEM “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Rev. 1.3

  18. AEC-Q100 and AEC-Q006 Qualified

  19. Two Ambient Temperature Grades Available:

        - ATA6562-GAQW1, ATA6563-GAQW1, ATA6562-GBQW1 and ATA6563-GBQW1 up to Tamb = +125°C

        - ATA6562-GAQW0, ATA6563-GAQW0, ATA6562-GBQW0 and ATA6563-GBQW0 up to Tamb = +150°C

  20. Packages: 8-pin SOIC, 8-pin VDFN with Wettable Flanks (Moisture Sensitivity Level 1)

3. Applications

Classical CAN and CAN FD networks in Automotive, Industrial, Aerospace, Medical and Consumer applications.