ATA8202C-PXQW-1 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Receivers

RF receivers are essential components of any wireless communication system. They are used to detect and receive signals from a distant transmitter or other electromagnetic waves. The ATA8202C-PXQW-1 is a common RF receiver that is used in many different applications, ranging from consumer electronics to military and aerospace applications. This article will discuss the application field and working principle of the ATA8202C-PXQW-1.

The ATA8202C-PXQW-1 is a low-power, low-noise amplifier (LNA) designed for a wide range of applications. It is commonly used in wireless communication systems, such as wireless LANs and wireless TV systems, as well as cellular and satellite communication equipment. It is also suitable for use in automotive, aerospace and commercial applications. The ATA8202C-PXQW-1 is capable of working with RF frequencies ranging from 500 MHz to 4200 MHz.

The ATA8202C-PXQW-1 features a low noise figure that ensures a highly efficient reception of signals. It is rated to have a third-order intermodulation of -68 dBc, which ensures that there is no signal overlap when multiple signals are being received at the same time. Furthermore, the ATA8202C-PXQW-1 features a high linear gain of up to 20 dB, allowing for increased signal strength and improved noise reduction. The device also has a low harmonic distortion of -90 dBc, which eliminates any interference or spurious signals that can be detrimental to the reception of the desired signal.

The ATA8202C-PXQW-1 operates in two different modes depending on the application. In the low noise amplifier (LNA) mode, the device amplifies incoming signals while maintaining a low noise figure. The amplifier gain is set by adjusting the bias current applied to the device. The response of the LNA in this mode is typically flat, meaning that all frequencies will be amplified to the same level. This mode is useful for applications that require a wide frequency range.

In the low-distortion amplifier (LDA) mode, the ATA8202C-PXQW-1 provides a higher gain while still maintaining a low distortion level. The gain is adjusted using a voltage control setting, which ensures that the desired signal is amplified while suppressing any unwanted signals. This mode is useful for applications that require a narrow frequency range where specific signals need to be amplified while other signals are suppressed. Both modes of the ATA8202C-PXQW-1 have a high power supply rejection ratio of 80 dB, which eliminates interference caused by power supply fluctuations or noise.

The ATA8202C-PXQW-1 is a versatile RF receiver that can be used in a wide range of applications. Its low noise feature makes it suitable for applications where signals need to be received without interference. Its low distortion feature makes it suitable for applications where specific signals need to be amplified while others are suppressed. Its high power supply rejection ratio ensures that interference caused by power supply fluctuations or noise is eliminated. All of these features make the ATA8202C-PXQW-1 a popular choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference