| Allicdata Part #: | ATS-06B-126-C1-R0-ND |
| Manufacturer Part#: |
ATS-06B-126-C1-R0 |
| Price: | $ 3.51 |
| Product Category: | Fans, Thermal Management |
| Manufacturer: | Advanced Thermal Solutions Inc. |
| Short Description: | HEATSINK 54X54X15MM XCUT |
| More Detail: | Heat Sink Assorted (BGA, LGA, CPU, ASIC...) Alumin... |
| DataSheet: |  ATS-06B-126-C1-R0 Datasheet/PDF |
| Quantity: | 1000 |
| 10 +: | $ 3.18591 |
| 30 +: | $ 3.09981 |
| 50 +: | $ 2.92774 |
| 100 +: | $ 2.75549 |
| 250 +: | $ 2.58325 |
| 500 +: | $ 2.49714 |
| 1000 +: | $ 2.23882 |
| Series: | pushPIN™ |
| Part Status: | Active |
| Type: | Top Mount |
| Package Cooled: | Assorted (BGA, LGA, CPU, ASIC...) |
| Attachment Method: | Push Pin |
| Shape: | Square, Fins |
| Length: | 2.126" (54.01mm) |
| Width: | 2.126" (54.00mm) |
| Diameter: | -- |
| Height Off Base (Height of Fin): | 0.590" (15.00mm) |
| Power Dissipation @ Temperature Rise: | -- |
| Thermal Resistance @ Forced Air Flow: | 5.45°C/W @ 100 LFM |
| Thermal Resistance @ Natural: | -- |
| Material: | Aluminum |
| Material Finish: | Blue Anodized |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thermal-Heat Sinks are tools used to dissipate heat, and the ATS-06B-126-C1-R0 thermal-heat sink is no exception. It is primarily used for cooling circuits and other small components, but there may be other applications that could benefit from its use.
The primary function of the ATS-06B-126-C1-R0 thermal-heat sink is to absorb and dissipate heat from an electronic component or circuit. This is achieved by a combination of radiative and convective cooling methods. The sink is fabricated from aluminum or copper, which is an ideal material for its intended purpose because of its low thermal resistance and high surface area. The aluminum or copper helps to distribute heat away from the circuit or component that it is attached to.
The ATS-06B-126-C1-R0 thermal-heat sink has two main components; the base and fins. The base is the main thermal mass of the sink and is usually made of a thermally conductive material such as aluminum or copper. The base helps to spread heat away from the component before it can reach the fins. The fins, on the other hand, are made of thin strips of material and are designed to provide an increase in surface area. This allows for more efficient removal of heat through convective cooling. The increased surface area also gives the fins a larger effective radiative area, increasing their efficiency in dissipating heat away from the component into the surrounding environment.
In addition to the base and fins, the ATS-06B-126-C1-R0 thermal-heat sink is also connected to a fan or blower, which helps to increase the dissipation of heat from the component. This is especially beneficial when the component is under its maximum operating temperature. The fan or blower directs air over the fins, allowing for an even greater increase in both convective and radiative cooling, as well as internal pressure.
The ATS-06B-126-C1-R0 thermal-heat sink is a reliable device that is useful for both cooling small components and giving improved cooling when used with a fan. Its design and materials provide a highly efficient cooling system that is suitable for a variety of applications, and its low-cost and easy installation make it ideal for a wide variety of uses. Some common applications for the ATS-06B-126-C1-R0 Thermal-heat sink are cooling for network switches, audio and video processors, servers, hard drives, microprocessors, telecommunication equipment, and many more.
The ATS-06B-126-C1-R0 thermal-heat sink is a versatile and reliable cooling device. Its simple design and effective cooling properties make it an excellent choice for dissipating heat from a wide variety of components and circuits. Its low cost and easy installation make it a great choice for any application that requires an efficient cooling solution.
The specific data is subject to PDF, and the above content is for reference