| Allicdata Part #: | ATS16929-ND |
| Manufacturer Part#: |
ATS-10A-120-C2-R0 |
| Price: | $ 3.95 |
| Product Category: | Fans, Thermal Management |
| Manufacturer: | Advanced Thermal Solutions Inc. |
| Short Description: | HEATSINK 45X45X25MM XCUT T766 |
| More Detail: | Heat Sink Assorted (BGA, LGA, CPU, ASIC...) Alumin... |
| DataSheet: |  ATS-10A-120-C2-R0 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 3.59100 |
| 10 +: | $ 3.49335 |
| 25 +: | $ 3.29918 |
| 50 +: | $ 3.10502 |
| 100 +: | $ 2.91098 |
| 250 +: | $ 2.71691 |
| 500 +: | $ 2.52285 |
| 1000 +: | $ 2.47433 |
| Series: | pushPIN™ |
| Part Status: | Active |
| Type: | Top Mount |
| Package Cooled: | Assorted (BGA, LGA, CPU, ASIC...) |
| Attachment Method: | Push Pin |
| Shape: | Square, Fins |
| Length: | 1.772" (45.00mm) |
| Width: | 1.772" (45.00mm) |
| Diameter: | -- |
| Height Off Base (Height of Fin): | 0.984" (25.00mm) |
| Power Dissipation @ Temperature Rise: | -- |
| Thermal Resistance @ Forced Air Flow: | 3.48°C/W @ 100 LFM |
| Thermal Resistance @ Natural: | -- |
| Material: | Aluminum |
| Material Finish: | Blue Anodized |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thermal - Heat Sinks
The ATS-10A-120-C2-R0 is a thermal-heat sink component designed for a variety of applications in the consumer and industrial markets. Its primary use is in LED lighting products, such as architectural lighting, commercial lighting, decorative lighting, and industrial lighting. In addition, this thermal-heat sink can be installed in cooling systems, such as refrigeration, air conditioning, and water cooling.
A thermal-heat sink is basically a combination of a fan and an aluminum heat sink, used to dissipate heat from a device. The fan draws air through the heat sink, which is designed to spread out the heat, and then release it to the surrounding air.
The ATS-10A-120-C2-R0 has been designed to be an energy efficient thermal-heat sink, utilizing a patented "Burn Out" technology to ensure that the fan runs only as needed. This ensures that the fan runs only when necessary, helping to reduce energy consumption while maintaining performance. The aluminum heat sink is designed to dissipate heat quickly, allowing it to run cooler and more efficiently.
The ATS-10A-120-C2-R0 is a long-term solution for dissipating heat. It has been designed to operate in any environment, from a normal operating temperature range of -40°C to +125°C. This ensures that the thermal-heat sink is reliable and efficient in a wide range of environments and operating conditions. The heat sink is corrosion-resistant, and is mandated by the standards of the International Electrotechnical Commission (IEC).
The ATS-10A-120-C2-R0 has a built-in temperature-sensing system, which allows the fan to be specified to run according to the temperature of the device. This helps the fan to only run as needed, ensuring the best energy efficiency possible. In addition, the thermal-heat sink is also designed with a thermal cutoff switch that will automatically shut off the fan when the temperature reaches a certain level, protecting the device from overheating.
The ATS-10A-120-C2-R0 thermal-heat sink is a cost-effective and reliable solution for dissipating heat in a wide variety of applications. Its patented technology, energy efficiency, and durability ensures the highest performance in any environment. It is an ideal solution for LED lighting applications, as well as for cooling systems in commercial and industrial environments.
The specific data is subject to PDF, and the above content is for reference