ATS-18D-183-C2-R0

Series:	pushPIN™
Part Status:	Active
Type:	Top Mount
Package Cooled:	Assorted (BGA, LGA, CPU, ASIC...)
Attachment Method:	Push Pin
Shape:	Square, Fins
Length:	1.575" (40.00mm)
Width:	1.575" (40.00mm)
Diameter:	--
Height Off Base (Height of Fin):	0.790" (20.00mm)
Power Dissipation @ Temperature Rise:	--
Thermal Resistance @ Forced Air Flow:	5.37°C/W @ 100 LFM
Thermal Resistance @ Natural:	--
Material:	Aluminum
Material Finish:	Blue Anodized

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thermal - Heat Sinks: ATS-18D-183-C2-R0 application field and working principle

The ATS-18D-183-C2-R0 is a type of thermal - heat sink that is used in a range of heat exchange and energy transfer applications. They are designed to absorb and release thermal energy by the physical act of circulation. Heat gadgets such as computer components, transistors, and other fragile electronic components are heat dissipated with the help of heat sinks. The principle behind heat sinks and ATS-18D-183-C2-R0s is convection.A thermal - Heat Sink works on the basis of convection, where the movement of heat between two bodies is dependent on their temperature difference. In other words, under the influence of any temperature gradients, a fluid would tend to move from the place of higher temperature (hot side) to the place of lower temperature (cold side). This phenomenon can be used to transfer heat away from the hot side, towards the colder side.Heat sinks work by collecting and dissipating the heat from whatever source it comes from. When the heat sinks are placed in heated environments, air molecules in contact with the surfaces succeed in taking heat away from the surface. Through air, this heat moves towards the cooler side or surfaces for extra dissipation, and the remaining air is heated during its retreat. As a result, the thermal energy is dissipated into the environment because the heat density, also known as thermal diffusivity, is inversely proportional to the temperature. This is how ATS-18D-183-C2-R0s and other heat sinks remove heat from the component or surface they are mounted on. The ATS-18D-183-C2-R0 is a passive heat sink that is generally composed of a base, fins, and a heat spreader. The base is the bottom, solid part usually made from copper, aluminum, or other thermally conductive material. The heat spreader is positioned between the bottom base and the fins, and its purpose is to spread the heat collected from the base equally between all fins. Last but not least is the fins, which are usually made from aluminium and shaped like fins, which helps their surface area increase and thus conduct more heat away from the source. Fins are usually pressed together but can also be soldered, allowing the heat dissipated more quickly. The purpose of the various materials that make up the ATS-18D-183-C2-R0 is to provide balance between a low cost, good thermal performance and an easier installation process. Due to the fact that the base is usually copper, it is able to absorb more heat compared to other materials like aluminum due to its high thermal conductivity, but it also recommends a higher cost. The aluminum fins are much cheaper than the copper base and, since they have a wide surface area, provide great thermal performance when its heat is released through the air. The heat spreader is also designed to offer a wide coverage area and increased thermal performance by optimizing and maximizing the performance of the copper base and fins.The ATS-18D-183-C2-R0 is designed for use in a range of applications, including cooling computer systems and components, as well as preserving the proper functioning of other electronic components. They are also used in cooling mechanisms for automotive engines and other types of machinery.Since thermal - heat sinks are designed to constantly absorb and release thermal energy, they must be designed with a certain level of resistance to corrosion and other damages. This ensures that the heat sink remains in its original form and continues to perform its functions without any interruptions. For this reason, the ATS-18D-183-C2-R0 is also protected with a robust coating to protect against debris and other damaging liquids. In conclusion, the ATS-18D-183-C2-R0 is a type of thermal - heat sink designed for use in a variety of applications, ranging from cooling computer systems and components to preserving the proper functioning of various electronic components and automotive engines. It uses the principle of convection to circulate thermal energy, where air moves from the hot side to the cold side to transfer heat away from and toward the source. The ATS-18D-183-C2-R0 is composed of a copper base, heat spreader, and aluminium fins, which offer both thermal performance and an affordable price. The component is also protected with a robust coating to prevent damage and corrosion.

The specific data is subject to PDF, and the above content is for reference