ATS164B-E

Series:	ATS
Packaging:	Bulk
Part Status:	Active
Type:	MHz Crystal
Frequency:	16.384MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	40 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Mounting Type:	Through Hole
Package / Case:	HC-49/US
Size / Dimension:	0.427" L x 0.177" W (10.85mm x 4.50mm)
Height - Seated (Max):	0.145" (3.68mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ATS164B-E: Crystals for Applications and Working Principle

Crystals are a type of material that has both electrical and mechanical properties. Crystals have been used in a wide variety of applications over the years, including clocks, oscillators, sensors, signal generators and even transistors. The ATS164B-E crystal is one example of a crystal that can be used in multiple applications.The ATS164B-E crystal is an economical, low-cost crystal oscillator. It is made of an ATS164B GaAs substrate integrated with an E-mode resonator. It is designed for frequency stabilization and provides a very low phase noise and high frequency stability. The frequency range of this oscillator is between 6 to 8 MHz and the harmonics up to the 30th order are below -50 dBc. The device is offered in several different options including CMOS, TTL and HCMOS, and can be mounted on a circuit board or in a socket. The ATS164B-E crystal is used in various applications such as radio receivers and transmitters, cell phones, GPS systems, timing electronics, and radio frequency (RF) amplifiers. In radio receivers and transmitters, it is used to stabilize the frequency of the radio signal for accurate signal reception and transmission. In cell phones, the crystal is used to accurately monitor the signal frequency and ensure good voice quality. In GPS systems, the oscillator is used to generate stable and accurate clock signals, which are required for the operation of GPS receivers and signal tracking. The working principle of the ATS164B-E crystal is based on its electrical and mechanical properties. The mechanical properties of the crystal cause it to vibrate at a particular frequency when a voltage is applied to it. This vibration can be used to generate a signal of constant frequency and amplitude. This signal can then be used as a reference to control or stabilize the frequency of a radio transmitter or receiver. The electrical properties of the crystal also play an important role in its working principle. When an AC voltage is applied to the crystal, a capacitive reactance is produced. This reactance is dependent on the frequency of the applied voltage, and at a certain frequency, resonance occurs where the reactance of the crystal is equal to the impedance of the circuit. This resonance can be used to achieve frequency accuracy and stability for various applications.The ATS164B-E crystal provides high frequency stability, low phase noise, and high reliability in various applications. It is an economical and low-cost solution for timing and frequency reference in communication systems. This crystal can be used to generate or stabilize frequencies in radio receivers and transmitters, cell phones, GPS systems, and timing electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description