ATZB-X0-256-4-0-CNR

Serial Interfaces:	ISP, JTAG, SPI, UART, USART
Package / Case:	Module
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Current - Transmitting:	34.8mA
Current - Receiving:	8.7mA ~ 14.5mA
Voltage - Supply:	1.8 V ~ 3.6 V
Memory Size:	256kB Flash, 4kB EEPROM, 16kB SRAM
Utilized IC / Part:	AT86RF212B
Antenna Type:	Integrated, Chip
Series:	ZigBit™
Sensitivity:	-103dBm
Power - Output:	11dBm
Data Rate:	1Mbps
Frequency:	900MHz
Modulation:	--
Protocol:	Zigbee®
RF Family/Standard:	802.15.4
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

< p > RF Transceiver Modules are used for a wide array of applications, ranging from industrial, consumer, and aerospace to medical applications. The ATZB-X0-256-4-0-CNR is a high performance RF transceiver module designed for high speed, low power, and various radio communication protocols. < /p >< p >This transceiver module is based on a qualified, full-digital radio processor capable of multi-protocol transceiver baseband protocol stack serial sensor data interface, and a high-performance radio transceiver circuit. It also provides an integrated GFSK demodulator, FSK/MSK modem, and configurable dual-band support. The module has a wide operating frequency range from 860 MHz to 960 MHz with a channel bandwidth of 25 kHz. < /p >< p >The ATZB-X0-256-4-0-CNR transceiver module was designed to meet the needs of radiofrequency (RF) projects in critical applications. Its features drive new designs capabilities with respect to key areas such as intermittent duty cycle operation, low power consumption, a wide temperature range, optimized transmission distance, active base station selection, and continuous monitoring of communication links. This transceiver module also supports configurable over-the-air activity parameters, allowing the device to send set messages and respond to received messages autonomously. < /p >< p >A key feature of the ATZB-X0-256-4-0-CNR is its working principle. This transceiver module is designed for two-way wireless communication. It operates on a low-power, digital radio frequency (RF) signal. When transmission is required, the transceiver module receives data over the airwaves, converts it from analog to digital, and encodes it into a radio wave. The converted signal is then sent through a transceiver antenna to a receiving antenna at a distant location. At the receiving end, the transceiver receives the signal, converts it from analog to digital, and decodes the encoded information. This information is then used to interpret the signal and detected with the antenna. The signal is then processed and output from the transceiver module. < /p >< p >The ATZB-X0-256-4-0-CNR is suitable for a wide range of applications. It is suitable for use in internet of things (IoT) applications, industrial, commercial, and consumer radio frequency identification (RFID) systems, wireless sensor networks, radio navigation systems, digital radio broadcast systems, industrial and residential networks, and various embedded systems. Thanks to its low power consumption, high transfer data rate, digital radio frequency signal, and integrated sensors, this transceiver module is a perfect choice for all types of radio frequency projects. < /p >

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description