AVO100-48S1V8-6L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic circuits used to convert a direct current (DC) input voltage into a different DC output voltage. The AVO100-48S1V8-6L is one such DC-DC converter designed to provide a versatile solution for powering a variety of consumer products. In this article, we will discuss the application field and working principle of the AVO100-48S1V8-6L converter.

The AVO100-48S1V8-6L is a low voltage, low quiescent current, buck-boost DC-DC converter optimized for applications such as consumer electronics, automotive, industrial, and portable applications. It is a three stage DC-DC converter with a wide input voltage range of 2.6V to 18V and an output voltage range of 5V to 48V. It can provide up to 100W of power with a high efficiency of 95%. The other features of the AVO100-48S1V8-6L include short circuit protection, overtemperature and overvoltage protection, overcurrent compensation, and overdischarge protection.

The AVO100-48S1V8-6L is a step-down buck converter with a wide input voltage range and an adjustable output voltage. It is designed using a three-stage architecture in which the input voltage is first converted to a higher voltage by a buck converter stage, then a low dropout (LDO) regulator is used to reduce the voltage, and finally a linear post regulator is used to fine tune the regulated voltage. The use of a three-stage architecture ensures a high level of efficiency and performance.

The AVO100-48S1V8-6L can be used in a large range of applications where a low voltage, low noise, and high power solution is needed. Some of these applications include:

• Industrial Process Control
• Portable Electronics
• Automotive ECUs and other Electronic Devices
• Video and Embedded Systems

The AVO100-48S1V8-6L works on the principle of step-down voltage conversion. It uses two power semiconductor switches as the main components. The input voltage is applied to the primary winding of a transformer. The output voltage is obtained from the secondary winding of the transformer. The two power switches are used to control the flow of current through the primary winding, thus controlling the output voltage. The two switches are operated in an ON-OFF sequence to create an AC waveform, with the frequency of the waveform being determined by the speed of the switch operation.

The AVO100-48S1V8-6L is a high performance, low noise, and highly efficient DC-DC converter suitable for powering a range of consumer products. It is an ideal solution for applications requiring low voltage, low noise, and high power solution. With its wide input voltage range and adjustable output voltage range, it is a versatile and cost effective solution for powering a variety of products.

The specific data is subject to PDF, and the above content is for reference