AVRM1608C270KT800M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AVRM1608C270KT800M varistors are non-linear elements which provide surge protection. Because of their unique design, they offer low clamping voltage and good surge protection performance across a wide range of temperatures and frequencies. The AVRM1608C270KT800M is a varistor designed for AC power applications. The varistor is an aluminium oxide block, with leads on both ends, and has a small space between the two leads. This space acts as the gap between the two parts of the varistor, and when the voltage exceeds the gap, the current between the two parts of the varistor is very high, allowing current to flow between the two parts. The maximum current that can be allowed through the varistor is determined by the gap, and the value of the gap is determined by the design.

The AVRM1608C270KT800M varistor has a rated breakdown voltage of 270V AC, and a maximum breakdown voltage of 800V. The maximum breakdown voltage is higher than the rated breakdown voltage, which is important to prevent excessive current flowing through the varistor and causing it to overheat. Due to this higher breakdown voltage, the AVRM1608C270KT800M varistor can provide a more effective surge protection for high voltage applications. The maximum peak current rating of the varistor is 6A, and this can provide protection for loads up to 6A. The operating frequency of the varistor is typically from 47Hz to 68MHz.

The main application of the AVRM1608C270KT800M varistor is in AC power line protection circuits. The varistor can be used to protect circuit components from dangerous over voltage surges, which can be caused by lightning strikes or other similar events. The varistor is designed to absorb the extra energy in the circuit, allowing it to operate with no damage or disruption. This makes the varistor a valuable tool in protecting AC power lines.

The varistor also offers good protection from high frequency over voltage transients. High frequency transients can travel along the power line and cause damage to other circuit components, and the varistor can absorb this energy, preventing any damage. The varistor can also be used in a wide variety of applications, including motor control, motor inverters, UPS, industrial motors, power supplies, and lighting.

The working principle of the AVRM1608C270KT800M varistor is relatively simple. When a sudden increase in voltage occurs, the gap between the two ends of the varistor increases, allowing high amounts of current to flow through the varistor. This current absorbs the high voltage energy, preventing it from flowing through the other components in the circuit. When the energy is absorbed by the varistor, it dissipates the excess energy as heat, preventing the other components in the circuit from being damaged.

In conclusion, the AVRM1608C270KT800M varistor is a valuable tool for providing surge protection for AC power lines. The varistor can absorb high voltage, and high frequency transients, preventing them from causing damage to other components in the circuit. The varistor also has a wide operating temperature range, allowing it to be used in a variety of applications. The varistor is a valuable tool for providing surge protection in AC power lines.

The specific data is subject to PDF, and the above content is for reference