Allicdata Part #: | 535-12742-ND |
Manufacturer Part#: |
AWBC-09 |
Price: | $ 0.29 |
Product Category: | Filters |
Manufacturer: | Abracon LLC |
Short Description: | FERRITE BEAD 800 OHM AXIAL 1 LN |
More Detail: | N/A |
DataSheet: | AWBC-09 Datasheet/PDF |
Quantity: | 1708 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 0.26460 |
10 +: | $ 0.23184 |
100 +: | $ 0.16538 |
500 +: | $ 0.13892 |
1000 +: | $ 0.11246 |
2500 +: | $ 0.10584 |
Series: | AWBC |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Filter Type: | Power Line |
Number of Lines: | 1 |
Impedance @ Frequency: | 800 Ohms @ 100MHz |
Current Rating (Max): | -- |
DC Resistance (DCR) (Max): | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | Axial |
Mounting Type: | Through Hole |
Height (Max): | 0.394" (10.00mm) |
Size / Dimension: | 0.236" Dia (6.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Ferrite beads and chips are widely used in many industries as components of electrical circuits. The AWBC-09 application field and working principle demonstrate the versatility of ferrite materials and their ability to provide effective electrical noise reduction.
Ferrite beads are composed of small particles of magnetic material embedded in a non-conductive, often plastic, substrate. The bead is designed like a coil to direct low level signals around the material while encasing it in a grounded protective sheath. Beads usually are available in a range of sizes and shapes, and processing techniques can also be used to tailor the performance of the unit.
Ferrite chips are also made of ferrite material, but in a chip form to provide a small surface area with high frequency signal blocking. The chip is composed of ferrite grains held together with a binder of an inert material. Chips are typically small, shallow layers of ferrite with a high binding force that provide effective electrical noise reduction.
The AWBC-09 is a type of ferrite bead and chip application, which is designed specifically for use near or in the input and output circuitry of a system in order to reduce the amount of electrical noise. The AWBC-09 is composed of multiple layers of ferrite bead and chip in the same package. The surface-mount technology design of the AWBC-09 enables a high rate of attenuation and a low series resonance frequency. The AWBC-09 is a multi-layer, hybrid ferrite bead and chip assembly, which combines the superior protection of ferrite beads and chips into a single package.
To understand how the AWBC-09 works, it is important to understand the properties of ferrite beads and chips. Ferrites have high permeability, low losses, and high-capacity shielding, which make them ideal for signal blocking and noise reduction. The presence of the beads and chips creates a barrier that blocks high-frequency signals, allowing only low-frequency signals to pass. This helps to keep the signal clean and free from unwanted noise.
The AWBC-09 application field and working principle provides an efficient and effective method to reduce electrical noise. The AWBC-09 is an ideal solution for a variety of applications, including signal noise reduction in automotive applications, noise suppression in communications systems, and interference control for consumer electronics. The AWBC-09 is an everyday example of how ferrite beads and chips can improve the performance of electrical circuits and enhance the reliability and efficiency of the system.
The specific data is subject to PDF, and the above content is for reference
FERRITE BEAD 150 OHM 1206 1LN
FERRITE BEAD 60 OHM 0402 1LN
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD