Allicdata Part #: | 1949-1036-ND |
Manufacturer Part#: |
AWS-3F-00501800-50-23P |
Price: | $ 2.08 |
Product Category: | RF/IF and RFID |
Manufacturer: | L3 Narda-MITEQ |
Short Description: | AMPLIFIER |
More Detail: | RF Amplifier IC General Purpose 500MHz ~ 18GHz Mod... |
DataSheet: | AWS-3F-00501800-50-23P Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 1.89000 |
Specifications
Series: | LCA |
Part Status: | Active |
Frequency: | 500MHz ~ 18GHz |
P1dB: | 23dBm |
Gain: | 25dB |
Noise Figure: | 5dB |
RF Type: | General Purpose |
Voltage - Supply: | 12V |
Current - Supply: | 450mA |
Test Frequency: | -- |
Package / Case: | Module, SMA Connectors |
Supplier Device Package: | Module |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifier: AWS-3F-00501800-50-23P
RF amplifiers are an important type of electronic components that can be used for various applications. The AWS-3F-00501800-50-23P RF amplifier is a widely used component for applications such as Wireless RF transmission, Power Amplification, Antenna Signal Boosting, and Distortion-Free Audio.Application Field
The AWS-3F-00501800-50-23P RF amplifier is ideal for a variety of applications. It is used in wireless communication and radio frequency (RF) transmission. It can also be used to amplify signals from antennas in order to increase their range and reception. The amplifier is also used for power amplification, which is important for increasing the signal strength of receivers and transmitters. It can also be used for boosting weak audio signals, eliminating distortion in audio signals, and accurate frequency control.Working Principle
The AWS-3F-00501800-50-23P RF Amplifier is a voltage-gain amplifier with a low-noise figure. It amplifies and increases the input signal voltage by a factor of fifty times and is capable of operating with a bandwidth of 1MHz - 30MHz.The amplifier works by applying a DC voltage to its input terminal that is coupled to an external signal source. The voltage at the input terminal is then transmitted to the output terminal, where it is amplified by an internal gain stage. The gain is determined by the ratio of the resistance in the feedback path to the input resistance of the amplifier.The amplifier is capable of producing an output power of 50W and is constructed with an HF amplifier transistor, two electrolytic capacitors, two MOSFET transistors, a resistor, and an inductor. The amplifier also has an input impedance of 50 ohms and an output impedance of 50 ohms.Conclusion
The AWS-3F-00501800-50-23P RF amplifier is a versatile tool for a wide range of applications. It is ideal for increasing the range of antennas and eliminating distortion in audio signals. Additionally, its low-noise figure makes it ideal for Wireless RF transmission and Power Amplification. The amplifier works by applying a DC voltage to its input terminal, which is then transmitted to the output terminal where it is amplified by an internal gain stage. The amplifier has an input impedance of 50 ohms and an output impedance of 50 ohms, and can produce an output power of 50W.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC667LP2
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
TQM7M9023H
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
HMC406MS8GTR
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
ALM-GP003-BLKG
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
PTMA210452EL V1 R250
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
MGA-30116-BLKG
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...