AWSZT-27.00CV-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Resonators

A resonator is a device or system that resonates or vibrates at a specific frequency. The resonator is a passive device that possesses no active sources of power, but rather is a self-oscillating electrically-interacting system. Examples of resonators include the cavity resonator, crystal resonator, piezoelectric resonator, and radio-frequency resonator. Resonators are commonly used to filter and/or amplify signals, provide frequency stabilization and aiding in frequency calibration.

AWSZT-27.00CV-T Application Field and Working Principle

The AWSZT-27.00CV-T is an LC (Inductance-Capacitance) resonator used in a variety of applications. It is a panel or surface mounted device with an operating frequency range of 27.00MHz. The AWSZT-27.00CV-T is primarily used for radio frequency (RF) applications and for filter networks for applications such as mobile communications, GPS, and satellite antennas. The AWSZT-27.00CV-T is composed of an LC network that oscillates at 27MHz due to an inductor (L) and capacitor (C) that are placed in parallel with each other.

The purpose of the AWSZT-27.00CV-T is to act as a band pass filter with a narrow frequency response in the region of 27MHz. The resonance frequency is determined by the specific inductance and capacitance values chosen. In the AWSZT-27.00CV-T, the inductor and capacitor are comprised of microstrip lines. The inductor is a spiral-patterned metal strip and the capacitor is a single piece of dielectric material with metal electrodes on two sides. This type of LC network is known as an LC tank circuit.

The resonance frequency of the AWSZT-27.00CV-T is determined by the inductance and capacitance values chosen. The inductance and capacitance values are printed on the device for convenience. The resonance frequency is determined by the following formula:

F = 1 / 2π √(L x C)

Where F is the resonance frequency, L is the inductance value, and C is the capacitance value. In the AWSZT-27.00CV-T, the resonance frequency is determined to be 27MHz, making it suitable for applications such as GPS, mobile communications, and satellite antennas.

The resonance frequency is also determined by the Q factor (quality factor). The Q factor is a measure of the efficiency of the LC network, and is determined by the inductor and capacitor values. The Q factor is important in determining the bandwidth and shape of the filter. In the AWSZT-27.00CV-T,the Q factor is 1.58.

Conclusion

The AWSZT-27.00CV-T is an LC resonator used for radio frequency applications. It is composed of a spiral-patterned inductor and a dielectric capacitor. This type of LC network is classified as an LC tank circuit. The resonance frequency of the AWSZT-27.00CV-T is determined by the inductance and capacitance values chosen, and is 27MHz. The Q factor, or quality factor, is also determined by these values, and the AWSZT-27.00CV-T has a Q factor of 1.58. The AWSZT-27.00CV-T is suitable for applications such as mobile communications, GPS, and satellite antennas.

The specific data is subject to PDF, and the above content is for reference