AX101756

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AX101756 is an electromechanical device typically used for on/off machine control. The device is comprised of a normally open (NO) contact and a normally closed (NC) contact. The contacts are bridged by a solenoid resulting in electric current entering the solenoid and activating it. This activates the NO contact to close the circuit. As a result, power is delivered to the machine, thus activating it.

When the circuit is opened, the current stops flowing, and the solenoid releases its latch. This allows the NO contact to spring open, switching off the machine. The current then flows into the NC contact so that it can be used as an indicator for the open state of the circuit. This makes the AX101756 a very useful device in a number of on/off machine control applications.

One application that the AX101756 is often used in is for switch panel operation. Here, the device can be used to control the on/off states of a number of devices such as lights, motors, relays, switches, etc. Each of these devices is wired to the device in its own circuit. When a circuit is activated, it will open the normally closed contacts and activate the desired device. When the corresponding button is pressed again, the normally open contact will be closed, thus opening the circuit and deactivating the device.

Another application that the AX101756 is often found in is for higher-level automation systems. Here, the device is used to facilitate communication between the main automation system and a number of elements. For example, when the automation system needs to activate a certain machine, it will send out a signal to the AX101756 which will, in turn, activate that machine.

The AX101756 also finds applications in industrial automation systems, where it is used for motor control. Here, the device acts as an intermediary between a motor and its controller. When the motor is switched on, the device will connect its terminals, allowing the motor to draw power from the system. The device will then switch off the motor by opening its contacts when the signal is received from the controller.

One of the advantages that the AX101756 creates is its ability to automatically switch off the machine when there is no current flowing through the circuit. This helps to keep the system safe from overloads and temperature rises. Furthermore, as the device only needs a small amount of current to operate, it can also be used for low-power applications. Additionally, as the device can handle up to 250V, it can also be used in a wide range of applications.

The AX101756 is easy to install and requires very little maintenance. Furthermore, the device is relatively inexpensive and can be purchased from any good electrical supplier. By combining these features, the device has become a popular choice for use in a wide range of on/off machine control applications.

The specific data is subject to PDF, and the above content is for reference