AX7MBF4-320.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have many applications ranging from clocks to data communication and entertainment. AX7MBF4-320.0000C is a type of oscillator particularly suitable for use in high frequency systems, requiring precise timing and excellent performance in terms of operating frequency, phase noise, power consumption, and much more. Its application field and working principle are discussed in this article.

Application Field of the AX7MBF4-320.0000C Oscillator

The AX7MBF4-320.0000C Oscillator can be used in a wide range of applications. It is most commonly used in wireless communications systems, such as 5G networks, Wi-Fi, and other wireless devices where precise timing is required. The oscillator is also suitable for use in radio frequency identification (RFID) systems, as well as in industrial, medical, automotive, and other applications.

The AX7MBF4-320.0000C oscillator is designed for applications requiring a low power consumption and high speed. It features an ultra-low phase noise of -156 dbC/Hz at 10 kHz offset and a fast switching time of 10 nanoseconds. The oscillator is also compatible with a wide range of logic family, as well as CMOS and TTL circuits, making it suitable for use in a variety of systems.

Working Principle of the AX7MBF4-320.0000C Oscillator

The AX7MBF4-320.0000C oscillator is a voltage-controlled oscillator (VCO), which means it produces an output signal with a frequency proportional to the input voltage. The oscillator uses a Pierce oscillator circuit, which is a type of electronic oscillator that is based on the positive feedback principle. The Pierce oscillator circuit is composed of an amplifier, an input resistor, a capacitor, and an inductor, all of which are connected in series.

When a small AC voltage is applied to the input of the oscillator, it causes an oscillation to occur, which in turn produces a sinusoidal output waveform. The frequency of oscillation of the output waveform is determined by the capacitance and inductance of the circuit, and it can be changed by adjusting the electrical characteristics of the components.

The AX7MBF4-320.0000C oscillator can also be used to produce square or ramp waveforms. When configured in this way, the frequency of the output waveform can be adjusted by adjusting the bias voltage applied to the oscillator.

Conclusion

The AX7MBF4-320.0000C oscillator is an excellent choice for applications requiring low power consumption and high speed. It can be used in many different applications, from RFID systems to wireless communication networks, and its working principle is based on the Pierce oscillator circuit.

The specific data is subject to PDF, and the above content is for reference