AX7MCF3-200.0000T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	67mA
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	8-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	68mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Clearclock™ AX7
Voltage - Supply:	1.8V
Output:	CML
Function:	Enable/Disable
Frequency:	200MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are an important type of electronic circuit. They produce a periodic waveform from a DC voltage or current. Oscillators are used in a wide variety of applications, such as radio and television transmission, communication systems, navigation systems, and electronic instrumentation. In this article, we will discuss the application field and working principle of the AX7MCF3-200.0000T oscillator.

Overview

The AX7MCF3-200.0000T is a high-performance, high-frequency oscillator. It is capable of generating an accurate, stable, and low-phase-noise signal at frequencies up to 200MHz. The device is a highly integrated component, consisting of an oscillator, reference, and support components. It is ideal for use in applications where accuracy and low power consumption are critical.The oscillator is completely self-contained and operates on a single 5V supply. It has a wide tuning range, a low phase noise of typically -87 dBc/Hz at 10 kHz, and a PLL bandwidth of typically 100kHz. The device is capable of operation with a high level of reliability and performance, and is ideal for devices that require high-precision timing and frequency control.

Application Field

The AX7MCF3-200.0000T oscillator is ideally suited for a wide range of applications. It can be used in communications systems, radar and navigation systems, TV and audio receivers, and electronic instrumentation. It is also suitable for use in medical systems, military applications, aerospace systems, and renewable energy systems.The oscillator can be used in communication systems such as wireless and satellite communications, cellular networks, and radio and television broadcast systems. It can be used in navigation systems such as GPS and other global positioning systems.In addition, the AX7MCF3-200.0000T oscillator can be used in TV and audio receivers. It provides a stable, low-jitter reference signal that allows for optimal performance of the receiver. The oscillator is also suitable for use in electronic instrumentation. It can be used in devices such as frequency counters, frequency synthesizers, oscilloscopes, and digital data acquisition systems.

Working Principle

The AX7MCF3-200.0000T oscillator has a differential oscillator architecture that consists of a dual-frequency oscillator, voltage-controlled feedback oscillator, and a bandpass filter.It works by first producing a differential output between two pins. This output is then amplified and fed back to the oscillator through a bandpass filter. The filter selects the desired frequency, which is fed back to the oscillator. The oscillator then produces the output signal at the desired frequency.By adjusting the voltage on the control pins, the frequency of the output signal can be adjusted. This allows for precise control over the output frequency.

Conclusion

The AX7MCF3-200.0000T oscillator is an ideal component for a wide range of applications. It is a highly integrated device, capable of producing a stable, accurate, and low-phase-noise signal at frequencies up to 200MHz. The oscillator is self-contained and operates on a single 5V supply. Its wide tuning range, low phase noise, and PLL bandwidth make it suitable for applications that require high performance and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description