B048T240T30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are widely used in many electrical systems to convert one DC voltage to another. The simplest form is a buck converter, also known as a step-down converter, which converts a higher voltage to a lower voltage. The B048T240T30 is a high-power, high-efficiency buck switching converter with wide input and output voltage ratings and adjustable output voltage. This article will explain its application field and working principle.

Application Field:The B048T240T30 is a high power, high efficiency switch mode DC-DC buck converter. It is suitable for applications such as:

• 1. Automotive and transportation systems
• 2. Battery-powered systems
• 3. Industrial power supplies
• 4. Medical systems
• 5. Communications equipment
• 6. Consumer electronics
• 7. Other applications that need to convert a higher DC input voltage to a lower DC output voltage.

Working Principle:The B048T240T30 converter operates by controlling an internal switch that is connected between the input voltage and the output voltage. When the switch is turned on, the input voltage is applied to the output and current will flow from the input to the output. When the switch is turned off, the output voltage is disconnected from the input voltage and the current stops flowing from the input to the output. The buck converter can operate in two modes: continuous and discontinuous mode. In continuous conduction mode, the switch is always conducting and the inductor current never reaches zero. In discontinuous mode, the switch is periodically turned off so that the inductor current can drop to zero before it is turned back on again. The buck converter can be configured to provide the output voltage anywhere in the range of 0 V to 24 V by adjusting the duty cycle of the switch.

The B048T240T30 buck converter uses a constant on-time (COT) control scheme to regulate the output voltage. When the output voltage falls below the set voltage, the switch is turned on until the inductor current reaches a maximum value, then the switch is immediately turned off. This ensures a constant voltage at the output. The current limit of the converter can be adjusted via an external resistor and the frequency can be adjusted as well. The B048T240T30 converter has a wide input voltage range of 4.8 V to 48 V and the output voltage can be adjusted from 0 V to 24 V.

The B048T240T30 buck converter also has several other features including an adjustable current limit, a thermal shutdown feature, a soft-start feature, and an enable pin for controlling the main switch.

Conclusion: The B048T240T30 buck switching converter is a high power, high efficiency DC-DC converter with wide input and output voltage ratings and adjustable output voltage. It is suitable for a wide range of applications from automotive systems to medical systems. The converter uses a COT control scheme to regulate the output voltage. The converter also has several other features including an adjustable current limit, a thermal shutdown feature, a soft-start feature, and an enable pin.

The specific data is subject to PDF, and the above content is for reference