B20J40R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistors are electrical components that limit and direct current in a circuit. Through hole resistors, including the B20J40R, are a type of resistor designed for through-hole mounting on printed circuits. This type of resistor is among the most common and has been in use for decades. The B20J40R resistor is an example of this type and is suitable for professional-grade design applications such as SMD (surface-mount device) assembly.

The B20J40R resistor is a 20 ohm resistor rated for up to 40 watts (W) of power. It is designed to be mounted in printed circuit boards through a hole drilled into the board, connected both mechanically and electrically to the component terminals and soldered inside the board. This type of resistor is capable of dissipating large amounts of heat without risk of damage, and therefore can be used in applications where high power is expected.

The B20J40R is a surface-mount device (SMD) resistor. It consists of a small disc-shaped ceramic body that is coated with a resistive material and which can be placed directly on the surface of the printed-circuit board. The resistor does not require drilling, but rather is soldered directly on the surface of the board and then connected to the component terminals. The advantage of the SMD over the through-hole type is that it has a low manufacturing cost and a small footprint, making it suitable for high-density circuitry.

The working principle of the B20J40R resistor is the same as any other resistor. It is a resistive device that limits the amount of current through the circuit. The value of a resistor is measured in ohms, which is the unit of measure of resistance. As the current rises, so does the voltage drop, and the higher the voltage drop, the higher the resistance of the resistor. The B20J40R resistor has a nominal value of 20 ohms and is designed to handle up to 40 watts of power, allowing it to dissipate heat efficiently.

The B20J40R resistor is commonly used in a variety of industrial and commercial applications. It can be used in power supplies, voltage regulators, motor drives, battery chargers, UPS systems, and many other electrical or electronic devices. It can also be used in medical equipment, robotics, and even in some aerospace applications. Its high-temperature and high-power rating makes it a popular choice for many applications.

In conclusion, the B20J40R resistor is a popular SMD type resistor that is commonly used for through-hole mounting on printed circuits. It is rated for 20 ohms and 40 watts of power, making it a suitable choice for high-power applications. With its small footprint and low manufacturing cost, the B20J40R is an efficient and cost-effective solution for many industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference