B22KH-BC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Toggle switches have been utilized for a long time in electronic circuit design as a solution for controlling two different states. These simple switches provide a reliable and efficient mode of operation, and are used in a wide range of different functions and applications. The reason for their continued use is in part because of the fact that they are extremely easy to use and they are generally very reliable in their operation. The B22KH-BC is one of the most popular toggle switches available on the market. It is a two terminal, illuminated, momentary action, latching push-button switch.

The B22KH-BC was designed to be used primarily in control panels, machine panels, and other applications that require momentary contact. It is rated at AC 0.33A @ 125V, DC 0.3A @ 28V, and has a mechanical life of 50,000 cycles. It is also highly reliable and has a contact resistance of less than 100 mOhms.

The B22KH-BC features a two-position toggle switch for selecting between two different states or conditions. When the lever is flipped or pushed in one direction, it sends an electrical signal to the device being controlled. When the lever is flipped or pushed in the opposite direction, it sends a signal to the device being controlled to turn the device off. The signal is sent using a three-wire connection that consists of two conductors and one signal wire.

When the B22KH-BC is used in its “on” position, it is illuminated by two LED’s that are mounted on both sides of the toggle switch. This provides a visual indication to the operator of the current state of the device. The LED’s are powered using a 12-volt DC power supply, and the LED’s will remain lit while the lever is in the “on” position.

The B22KH-BC has been designed to be used in a wide range of different applications, including primary and backup motor control circuits, motor controllers, heating devices, lighting circuits, audio devices, and instrumentation systems. It is also often used in a variety of electronic devices such as calculators, remote-controlled toys, and consumer electronics.

The B22KH-BC is most commonly used in motor control applications. A variety of control schemes can be utilized with the B22KH-BC, such as single-throw, double-throw, and multi-throw configurations. This device is suited for use in applications where the device must be manually operated, as it requires no additional wiring or circuitry. It can also be used in applications where the device must be remotely operated, as it can be wired to a signal wire that can be controlled with a pulse-width modulated signal.

The B22KH-BC is an easy and efficient solution for controlling two different states that requires minimal installation and maintenance. It is reliable, durable, and cost-effective, and is suitable for use in a variety of applications. With its illuminated design and easy to operate lever, the B22KH-BC is one of the most popular toggle switches available on the market.

The specific data is subject to PDF, and the above content is for reference