B39172B4331P810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are one of the most widely used components in today\'s electronic or communication systems. Utilizing the characteristics of the acoustic wave, SAW filters can provide a simple yet effective solution to reduce interference between the electrical signals.

The B39172B4331P810 is a SAW filter which utilizes acoustic wave to filter and select the desired frequencies in a communication system. It is designed to achieve both high selectivity and high pass transmission performance. The filter has a center frequency of 886 MHz and a pass band of 880-892 MHz with an insertion loss of 0.7 dB.

The B39172B4331P810 is mostly used in point-to-point radio and cellular communications that rely on narrow band transmission. It helps to reduce interference from the adjacent channel and cross-channel signals to enhance the communication quality. It is also used in wireless networks such as Wi-Fi and Bluetooth, where it can provide frequency selection to reduce interference from/to other networks.

The B39172B4331P810 filter works by generating an acoustic wave with a frequency nearly the same as the desired frequency. This acoustic wave travels through the piezoelectric material and creates an electric field that can pick up and filter the desired signal.

The filter has two main components that make it operate. The transducer converts the electrical signal into the acoustic wave and vice versa, while a reflector helps to reflect the wave back into the transducer so that it can be converted back into an electrical signal. The transducer is made of two electrodes that are split into two halves and an absorbent material that is used to absorb the unwanted frequencies while retaining the desired ones.

The working of the B39172B4331P810 filter consists of three stages. First, the signal entering the filter is converted into an electrical wave and applied to the transducer. This causes the transducer to generate an acoustic wave with a frequency close to the input signal. This wave is then reflected by the reflector and travels back to the transducer where it is converted back into an electrical signal. Finally, this output signal is then filtered by the absorbent material to remove any unwanted frequencies, before it is output from the filter.

Overall, the B39172B4331P810 is an efficient and cost-effective SAW filter that is widely used in radio, cellular, and wireless communication systems to reduce interference and provide in excellent signal-to-noise ratio. By utilizing the properties of acoustic wave, the B39172B4331P810 can provide a reliable solution to frequency selection applications.

The specific data is subject to PDF, and the above content is for reference