B39202B9502L310

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface acoustic wave (SAW) filters are a type of passive filter used to manipulate electrical signals that range from low to very high frequencies. They are typically made from piezoelectric materials such as quartz, and take advantage of the fact that high-energy sound waves can be used to generate electrical signals. The B39202B9502L310 is a two-pole filter designed to pass a certain range of frequencies above a cut-off frequency and reject everything else.

The B39202B9502L310 is a popular SAW filter used in television receivers, communication circuits, and automotive applications. It is designed to improve signal-to-noise ratio by removing unwanted background noise, as well as reduce the effects of interference. Additionally, it can be used to reject interfering signals, such as other broadcasting stations or mobile phone signals, when used as a broadcast bandpass filter. It can also serve as a notch filter, which blocks out certain frequencies that may be interfering with the device’s operation.

The B39202B9502L310 is composed of a thin sheet of piezoelectric material, which is usually quartz. This sheet is coated with two metal electrodes, one on each side. When an AC voltage is applied, the piezoelectric material vibrates, and these vibrations are propagated across the surface of the material as a surface acoustic wave (SAW). These waves can be used to generate electric signals at certain frequencies.

As the wave travels along the piezoelectric sheet, it gradually loses energy. This phenomenon is known as substrate loss, and it causes the signal to be attenuated at certain frequencies. The electrodes then act as a series of resonators, which magnify the signal at certain frequencies, while attenuating signals at other frequencies. This is how the B39202B9502L310 filters signals. The device can be tuned to amplify or attenuate specific frequencies, depending on the desired effect.

The B39202B9502L310 is a popular choice for a wide range of applications. It is often used in television receivers and communication circuits to improve signal-to-noise ratio and reduce the effects of interference. It can also be used to reject interfering signals, such as other broadcasting stations or mobile phone signals. Additionally, it can be used as a broadcast bandpass filter, notch filter, or other type of filter, depending on the desired effect.

The B39202B9502L310 is a reliable, cost-effective SAW filter that can be tuned to perform various types of filtering. Its high level of performance makes it an ideal choice for a range of applications including television receivers, communication circuits, and automotive use. With its impressive filtering capabilities, the B39202B9502L310 can provide superior signal clarity in even the toughest of environments.

The specific data is subject to PDF, and the above content is for reference