B39212B3669U410

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW (Surface Acoustic Wave) filters are passive electrical components that are used to allow or reject certain frequencies and are essential components in telecommunications and signal processing systems. The B39212B3669U410 is a widely used SAW filter due to its low cost and high stability. In this article, we\'ll discuss its applications and working principle.

Applications

The B39212B3669U410 SAW filter is mainly found in radio, television and mobile communications. It is a highly stable, low cost device that can be used in a variety of applications. It is commonly used in base stations, transmitters, GPS receivers, radio receivers, automobile navigation systems, cellular telephones and more. Additionally, due to its small size, the B39212B3669U410 is often used in portable electronic equipment.

Working Principle

The B39212B3669U410 SAW filter works by launching and receiving surface acoustic waves (SAWs) between an input transducer and an output transducer. These transducers are formed by a combination of interdigital electrodes and reflector electrodes on a piezoelectric substrate. The transducers convert the incoming electrical signal to an acoustic wave, which is then output via acoustic waveguides. The acoustic wave passes through the substrate and through the two transducers. As the wave passes through the transducers, it is filtered and either allowed or rejected based on the frequency tuned in by the transducers. This is how the B39212B3669U410 SAW filter works to filter out undesired frequencies.

Conclusion

The B39212B3669U410 is a widely used SAW filter because it is both low cost and highly stable. It is used in a variety of applications, including base stations, transmitters and cellular telephones. Additionally, due to its small size, the B39212B3669U410 is often used in portable electronic equipment. In terms of its working principle, the B39212B3669U410 SAW filter works by launching and receiving surface acoustic waves (SAWs) between an input transducer and an output transducer. The transducers convert the incoming electrical signal into an acoustic wave, which passes through the substrate and through the two transducers. As the wave passes through the transducers, it is filtered and either allowed or rejected based on the frequency specified by the transducers.

The specific data is subject to PDF, and the above content is for reference