B39232B9628P810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters, commonly used in modern communication and electronic applications, are filter components used to isolate parts of a frequency spectrum in order to reduce noise and improve signal integrity. The B39232B9628P810 is a SAW filter that is used in a variety of applications. In this article, the B39232B9628P810 application field and its working principle will be discussed in detail.

The B39232B9628P810 is an octave-band SAW filter with a passband between 1.9GHz and 3.15GHz. Due to its wide passband, the B39232B9628P810 is frequently used in frequency dividers and as a wideband filter in wireless communication systems.

The filter is based on a bulk acoustic wave (BAW) architecture and is fabricated using a lithium niobate substrate. It is composed of two identical structures, with the center frequency located halfway between the two upper corner frequencies. The B39232B9628P810 is designed as an 8 pole filter with a passband attenuation of at least 5dB.

The working principle of the B39232B9628P810 is based on the fact that surface acoustic waves are generated on a piezoelectric substrate, such as lithium niobate, which then propagate in the material. The waves interact with an acoustic grating structure etched onto the surface of the piezoelectric material, which causes the waves to be reflected, absorbed, or transmitted depending on the frequency of the wave. Low frequency waves are reflected, and high frequency waves are transmitted. By controlling the grating structure, the B39232B9628P810 can be tuned to pass a specific frequency band and reject all other frequencies.

In conclusion, the B39232B9628P810 is a SAW filter that is used in a variety of applications, primarily to isolate and reduce noise in frequency dividers and wireless communication systems. It is based on a BAW architecture, and utilizes an acoustic grating structure etched onto the surface of a lithium niobate substrate to pass the desired frequency band and reject other frequencies.

The specific data is subject to PDF, and the above content is for reference