B39361B5074Z810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters are an important part of telecommunications, audio and video infrastructure and are widely used in a multitude of electronic systems. The B39361B5074Z810 saw filter is a 3rd order low-pass filter used as an input filter for RF and MM-wave transmitters. It\'s main function is to reduce unwanted harmonic and intermodulated interference, thus increasing the linearity and dynamic range of the transmitter.

The B39361B5074Z810 is a highly sophisticated, compact saw filter that takes advantage of the acoustic wave theory to filter out undesired signals. This saw filter utilizes two oppositely oriented air filters connected to a piezoelectric transducer which generates oscillations at a frequency determined by the filter\'s cut off frequency. The oscillations pass through the filters and are phase shifted at each corner due to the difference in phase propagation time of the acoustic waves. As these interacting waves reach the output port only the desired frequency is allowed to pass through. All frequencies higher or lower than the cut-off frequency are rejected.

The B39361B5074Z810 is a high-performace saw filter capable of operating from DC to 1000MHz with a low insertion loss and high harmonic rejection. This saw filter typically requires a supply voltage of 4.3V and can operate from -50°C to +90°C. The filter also features an ultra-low input power of -30 dBm, which makes it suitable for use in low-power applications such as cell phones, wireless networks and RF/MM-wave transmitters.

The use of the B39361B5074Z810 as the input filter for RF and MM-wave transmitters allows the impedance matching process to be simplified as the filter conditions the input signal to the transmitter, thus reducing the need for additional components. This results in a improved efficiency and improved dynamic range of the system.

In addition to it\'s use in RF and MM-wave transmitters, the B39361B5074Z810 can also be used as an output filter for RF amplifier stages. The filter can help reduce the effects of harmonic distortion, as well as improve the amplifier\'s stability and efficiency by providing a smooth termination resistance. In combination with digital pre-distortion techniques, the filter can help improve the linearity of amplifiers, thus allowing for higher output power.

Overall, the B39361B5074Z810 saw filter is an effective and reliable solution for RF and MM-wave filtering applications. It\'s high harmonic rejection, low insertion loss and low power requirements make it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference