B39361X6874D100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW Filters

Surface Acoustic Wave filters, or SAW filters, provide a cost-effective and reliable solution for RF signal processing. The filter is a waveform device containing numerous parallel thin electrodes on a single substrate, separated from each other by an insulating material. When a high-frequency electrical input signal is applied, an acoustic waveform is generated on the surface of the filter. The waveform then travels along the length of the filter and represents the input signal at the output.

The B39361X6874D100 is a high-performace SAW filter that is designed for medium frequency applications. It provides a passband from 6 kHz to 8.75 MHz, with insertion loss of less than 1 dB. It has a cutoff frequency of 8.75 MHz, a 3rd order rejection rate of 35 dB, and a Q-factor of 5. It also has a high stopband rejection of up to 50 dB, as well as harmonic suppression of up to 20 dB.

The B39361X6874D100 can be used in a variety of applications, including communications systems, base stations, wireless transmitters and receivers, automotive electronics, and portable devices. It is suitable for use in audio, data, and video anti-aliasing, low-noise amplifiers, and RF interference cancellation networks. The filter has also been widely used in radio and TV broadcast receivers.

The B39361X6874D100 is composed of two primary components: the transmission line element and the detector element. The transmission line element consists of several thin metallic electrode layers separated by an insulating layer. An electrical signal is applied to the electrodes, which causes an acoustic wave to propagate along the transmission lines. This wave is then detected by the detector element at the other end of the device, which converts it back into an electrical signal. This signal is then output to the user\'s specified equipment.

The working principle of the B39361X6874D100 is based on acoustic wave propagation. When an electrical signal is applied to the filter, it creates an acoustic wave on the surface of the filter. This wave is then propagated through the transmission line element, filtered according to the intended specification of the device, and then converted back to an electrical signal by the detector element at the output end. The B39361X6874D100 filters out any unwanted frequencies and amplifies the desired frequencies in order to provide a clean and precise signal for the user\'s application.

The B39361X6874D100 is a highly reliable and cost-effective device for a wide variety of applications. It is designed for medium-frequency applications, such as communications systems, RF connections, and wireless devices. It provides an insertion loss of less than 1 dB, high stopband rejection up to 50 dB, harmonic suppression up to 20 dB, and a Q-factor of 5. It can also be used in a variety of audio, video, and data applications, as well as RF interference cancellation networks.

The specific data is subject to PDF, and the above content is for reference