B39381B3825H310

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface Acoustic Wave (SAW) filters are electronic devices used for selection of specific frequencies by passing an electrical signal over a piezoelectric crystal material that they are constructed from. SAW filters can also be used for modulation, amplification and noise suppression, as well as frequency synthesis.

The B39381B3825H310 SAW filter is a compact, low profile, surface-mounted device designed for use with transmissions systems, and can accurately select frequencies from DC to 1GHz. It has a higher stopband attenuation and sharper roll-off than other types of filters, making it ideal for use in a variety of different applications, including wireless communications, base station filtering, instrumentation and broadcast video applications.

The B39381B3825H310 SAW filter is based on Rayleigh wave motion, which is the same type of wave motion found in most natural vibrations and sound waves. When a SAW filter is constructed, the piezoelectric material is cut in a particular pattern and then bonded to a stainless steel substrate. This substrate is coated with a thin metallized interface, which forms the resonance circuits in the filter. The resonance circuits are designed to pass only a certain frequency, or range of frequencies, while rejecting others that would otherwise be transmitted.

The working principle of a SAW filter is based on the fact that when a signal is passed through the filter, it vibrates the crystal material at its resonant frequency due to the piezoelectric effect. The frequency of the vibrating signal is determined by the pattern of the crystals cut within the filter. The signal vibrates at the same frequency as the filter, so only the signal of the desired frequency is allowed to pass through. This process reduces unwanted frequencies, which helps to eliminate interference from other signals in the environment.

The B39381B3825H310 SAW filter is designed to provide good attenuation of signals in the stopband, as well as low insertion loss and wide passband. The filter also has low reflections and a high ratio of Q. It is temperature stable, shock resistant, and provides a reliable and accurate signal. The filter can also be used in applications where space is limited.

SAW filters are widely used in a variety of applications, from telecommunications and test equipment to medical and industrial systems. The B39381B3825H310 SAW filter is a versatile and reliable device that can be used in many different applications. It is easy to install and maintain, and can provide reliable performance for many years.

The specific data is subject to PDF, and the above content is for reference