B39901B8745P810S5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW Filters are used to filter out signals of certain frequencies from a wide range of transmitted electronic signals. The specific type of filter that comes up for discussion here is B39901B8745P810S5. It is a SAW (Surface Acoustic Wave) Filter, also known as an RF (radio frequency) filter.

The B39901B8745P810S5 is a single pole High Pass Filter with a passband starting at 10 MHz and a cutoff frequency of 4.3GHz.

Its application range extends from cellular, personal communication systems (PCS) or WLAN-RF transmission systems to consumer electronics such as LCD, PDP, HDD or similar. It is also used in portable wireless devices like Wi-Fi and Bluetooth.

The B39901B8745P810S5 filter is based on SAW technology (also known as acoustic wave technology). It uses surface acoustic waves to filter and reduce noise caused by Wireless Communications or other forms of electronic interference. In the case of the B39901B8745P810S5, the filter is a "single pole" type, meaning that it is limited to the amount of noise it can reject in one particular pass band.

SAW Filters work by obtaining their signals through surface acoustic wave propagation. A signal of the desired frequency is transmitted through the substrate, usually made of quartz or lithium niobate, which helps to propagate the wave. The signal is then converted into mechanical vibrations, which travel along the surface of the substrate. This surface wave carries both frequency and amplitude information, which is used to produce electromechanical wave signals. The mechanical wave is then converted back into electrical signals, which are then amplified by the filter for the desired output.

The B39901B8745P810S5 filter uses surface acoustic wave technology to effectively filter out unwanted signals from a wide range of transmitted electronic signals. Its low insertion loss and high frequency stop make it an ideal choice for various applications in the wireless or consumer electronics industry.

In conclusion, the B39901B8745P810S5 SAW filter is a highly efficient device that is capable of filtering signals of specific frequencies within a wide range. It is an ideal choice for a range of applications, such as wireless communication systems, consumer electronics, and LCD, PDP, and HDD systems. The filter utilizes surface acoustic wave technology, which effectively converts electrical signals into mechanical vibrations, and back to electrical signals.

The specific data is subject to PDF, and the above content is for reference