B39941B8073P810A99

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF diplexer is a type of communication device used in a variety of consumer and industrial applications. It works by allowing two or more signals of different frequencies to pass through a single device. The B39941B8073P810A99 RF diplexer is designed to operate on frequencies between 100 kHz and 400 MHz and features various modes including receive, transmit, bidirectional, and standby. The device has a compact size and is well suited for portable applications.

In receive mode, the B39941B8073P810A99 RF diplexer acts as a low pass filter, passing only the lower frequencies. This allows signals from a single frequency source (such as a broadcast station or cell tower) to be separated before being sent to a receiver. In this way, it isolates interfering frequencies from the desired signal, improving signal-to-noise ratio and reception quality.

In transmit mode, the B39941B8073P810A99 acts as a high pass filter, passing only the higher frequencies. This is ideal for transmitting signals with a single frequency source (such as a base station or transmitter) to a receiver. Isolating interfering frequencies from the desired signal means that the signal is appreciably improved.

This device is also used in bidirectional mode, where it acts as a band-pass filter. Unlike receivers and transmitters which only deal with a single frequency, the B39941B8073P810A99 RF diplexer passes signals of a range of frequencies. This is useful in applications such as remote control receivers/transmitters and two-way radios, where signals of different frequencies will be received and transmitted at the same time.

The B39941B8073P810A99 RF diplexer features a standby mode which turns off or reduces the filter’s response. This is useful for applications such as cell towers where the device’s response can be altered to prevent interference with nearby signals.

The B39941B8073P810A99 is ideal for applications such as remote control receivers/transmitters, cell towers, two way radios, and broadcast stations. It is a compact device that can be used in both portable and stationary applications. It has a wide range of frequencies and is also suitable for use in bidirectional applications due to its band-pass filter characteristics. The device is also useful in applications which require isolation of signals, as it passes only the desired frequencies, improving reception and transmission quality. The device is also equipped with a standby mode, which turns off the filter for added convenience in some applications.

The specific data is subject to PDF, and the above content is for reference