B514F-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

B514F-2 belongs to the thyristors family. Its general name is two transistors or two thyristors in series. It is an SCR module, made up of two SCRs connected in series. It is used in applications that need large power and current control, such as motor control, soft-start circuits, switched-mode power supplies, etc.

The working principle of B514F-2 is based on the principle of thyristor which is a solid-state electronic switch with two terminals called anode and cathode, and two control terminals gate and anode. It normally acts like an open switch. When an electric signal is applied to the gate, the device become a closed switch, allowing current to flow from anode to cathode. Once the signal is removed from the gate, it becomes an open switch, inhibiting current flow.

For B514F-2, it is composed of two SCRs connected in series. When the control signal (gate signal) is applied to the SCR on the left side of the module, the current flow and the voltage drop on the left side of the module. This will cause the right side SCR to become conductive and forward current to pass through the whole module. When the control signal is removed, both SCRs will be turned off, thus blocking current flow.

B514F-2 is mainly used in applications that require medium to large power and current control. The most common applications include motor control, enhanced power control units (EPCU), soft-start circuits, long distance power transmission, current control, and switched-mode power supplies. B514F-2 is also used in DC to AC converters and AC to DC inverters.

B514F-2 is very reliable in terms of high-current power control. It has a wide operating voltage range, from -400V to 450V and a maximum current capacity at 600V of 25A. It is capable of handling high-current load applications with low on-state voltage drop. It also has a low gate trigger current, at around 30mA. It is also highly resistant to reverse current, thermal shock, and other internal failures.

In conclusion, B514F-2 is an SCR module suitable for applications that need high-current power control. It is reliable, has low on-state voltage drop, and is highly resistant to internal failures. With its wide range of applications and its reliable performance, B514F-2 is one of the most used SCR modules.

The specific data is subject to PDF, and the above content is for reference