B58100A0629A000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NTC thermistors are a special type of thermistor that uses the temperature-dependent resistance of a negative temperature coefficient semiconductor, usually a ceramic of metal oxide, sandwiched between two metal electrodes, to measure temperature. Typically, an applied voltage causes a current to flow through the thermistor and the resultant temperature-dependent resistance of the thermistor is detected as a change in current or voltage.

The B58100A0629A000 is aTemperature-Sensitive Resistor element of NTC type, a Negative Temperature Coefficient (NTC) thermistor,and consists of a spherically-shaped, bronze bead outer shell with powdered cobalt as its inner core. It has a sensitivity of approximately 40 mW/K and a high temperature stability in the temperature range –30 to +80°C.

B58100A0629A000 is used in a wide variety of applications, from consumer electronics, automotive and industrial, to home and building automation temperature sensing. It can be used in home appliances such as washing machines and air conditioners; in automotive and industrial applications such as engine temperature control in cars and thermostatic control in industrial environments; and in home and building applications for thermostatic control of heating and/or ventilation systems.

The working principle of the B58100A0629A000 can be explained as follows. As the temperature increases, the resistance of the negative temperature coefficient thermistor also increases due to the negative temperature coefficient of the material. This, in turn, causes the voltage across the thermistor to increase. This voltage is measured by an external measuring system, which can then be used to calculate the temperature.

In addition to temperature measurement, the B58100A0629A000 can also be used for current-limiting applications. For example, it can be used to limit the current flow through an LED lamp when it is on. The LED\'s current is kept at a safe level and will reduce if the temperature of the LED increases, thus protecting the LED from potential damage.

To sum it up, the B58100A0629A000 is a type of NTC thermistor which is used for temperature measurement and current-limiting applications. Its resistance increases with increasing temperature, allowing a voltage to be measured. This voltage can then be used to calculate the temperature. Additionally, it can also be used to limit the current flow through an LED lamp in order to protect it from potential damage.

The specific data is subject to PDF, and the above content is for reference