B5J100E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors come in a variety of shapes and sizes, and one of the most commonly used types is the B5J100E. This type of resistor is an axial through-hole resistor, which means that it is designed to be seated in a printed circuit board through a hole drilled into the board, and is then soldered into place. The B5J100E has many advantages, including its low cost, compact size, wide range of values, and long service life.
B5J100E axial through-hole resistors are made from a metal or ceramic core that has been clad in a non-conductive coating. This non-conductive coating is usually either ceramic or glass, and this is what provides the insulation for the resistor. This type of resistor also has two leads, which are also clad in a non-conductive coating in order to avoid any electrical shorts. The two leads on the B5J100E are both axial, allowing them to be easily placed in the corresponding holes in a PCB. The B5J100E takes the form of a traditional axial resistor, with the two leads extending out the top and bottom of the resistor’s body.
The B5J100E has a wide range of values, ranging from 1ohm to 1Mohm. This allows it to be used for a variety of applications, such as in power supplies, amplifiers, voltage regulators, and various other circuit configurations. The B5J100E is often used as a terminating resistor, as it can help to reduce signal reflections on the transmission line and help to improve signal integrity. This resistor is also commonly used in audio circuits, where its low inductance and ability to handle high currents makes it an ideal choice. Another advantage of the B5J100E is its low cost, as it is often one of the cheapest types of resistors that can be used for these applications.
The B5J100E works by providing a resistance to an electrical current. When an electrical current passes through the resistor, it experiences a certain degree of resistance, which is determined by the value of the resistor. This resistance causes the current to be reduced, and the amount of resistance is expressed in Ohms. For example, a resistor with a value of 1 ohm will reduce the current by 1 ohm. This is an important concept, as it is a key contributor to the overall efficiency of a circuit.
In conclusion, the B5J100E is a type of through-hole resistor that is designed for use in printed circuit board applications. These resistors come in a variety of values, allowing them to be used in a variety of situations, and they are also quite inexpensive. Additionally, these resistors offer excellent performance and reliability, making them an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference