B72510V0250K062 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The B72510V0250K062 is a type of device typically used for overvoltage and overcurrent protection and is categorized under TVS - Varistors, MOVs. Varistors, or Voltage Dependent Resistors (VDRs), are composed of a sintered semiconductor material (typically ceramic metal oxide) that has a highly non-linear current-voltage characteristic across its terminals. This high non-linearity results from a Schottky barrier diode formation at the junctions of the sintered semiconductor material\'s numerous grains. When an applied voltage exceeds its threshold value, the device exhibits a lowering in its resistance, resulting in a lower voltage drop across its terminals.

The B72510V0250K062 is specifically designed for overvoltage and overcurrent protection applications that require a higher breakover voltage and lower leakage current. This device is housed in a 0.50” x 0.25” package and offers protection in the form of surge overvoltage and parasitic oscilation (oscillation in feedback loops due to component interactions). The B72510V0250K062 features low leakage current of 4uA and a breakover voltage of 520V.

The working principle of the B72510V0250K062 is relatively simple – when the applied voltage exceeds the device’s threshold voltage, electrons are activated, and as a result, the device’s resistance lowers. This causes current to flow and subsequently, the device behaves as an overvoltage / overcurrent protection element.

The B72510V0250K062 has a wide range of applications, primarily in the communication, automotive, industrial, consumer electronics, and medical industries. It can be used as a clamp for power distribution, or as a part of peripheral or host equipment. These devices are commonly used to provide overvoltage and overcurrent protection to semiconductor components, circuit boards, and other electronic components.

The B72510V0250K062 is not to be confused with other types of voltage dependent resistors such as gas discharge tubes (GDTs) and spark gap switches. GDTs are typically used in applications where the operating voltage and surge voltages are within a narrow range, whereas spark gap switches are designed for applications that require ultra-fast response times – up to 10-8 seconds. Moreover, these devices are not suitable for high-frequency applications.

In conclusion, the B72510V0250K062 is a type of voltage dependent resistor (VDR) used in overvoltage and overcurrent protection applications. It is typically housed in a 0.50” x 0.25” package and has a breakover voltage of 520V and low leakage current of 4uA. This device is commonly used in the communication, automotive, industrial, consumer electronics, and medical industries and is ideal for applications that require a higher breakover voltage and lower leakage current.

The specific data is subject to PDF, and the above content is for reference