B72580T0110K062

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors, also known as voltage-dependent resistors or VDRs, are electronic components used to prevent the occurrence of overvoltage or overcurrent on a device by allowing enough current to pass through and limiting the voltage applied. They are available in different forms including metal oxide varistors (MOVs), polymeric positive temperature coefficient (PPTC) resistors, and transient voltage suppressors (TVS). MOVs are the most commonly used type and represent a category of semiconductor components, which protect against both high and low voltage transients. The B72580T0110K062 belongs to the MOV category and is designed to protect a system against transient overvoltage spikes.

The B72580T0110K062 is a metal oxide varistor with a semiconductor ceramic element, which is made of zinc oxide particles that are mixed with a special binder and sintered at a high temperature to form a monolithic network. Its low capacitance and high surge current capability make it suitable for surge suppression in various electrical and electronic applications. The component offers a wide operating voltage range of 5 V to 630 V, and a maximum peak current rating of 7.5 A. The capacitance is much lower than similar devices, providing improved signal quality. The B72580T0110K062 is suitable for a broad range of low power applications and is suitable for use in industrial and commercial circuits, as well as in automotive and consumer applications.

The working principle of the B72580T0110K062 is based on its unique structure and semiconductor material. When a normal voltage is applied, the device acts like an open circuit and no current flows through it. When an overvoltage or overcurrent is applied, the zinc oxide elements in the MOV come into contact with each other, and the resistance of the device is reduced. This allows a part of the current to flow through the MOV, limiting the voltage and as a result, protecting the system from any damage caused by the transient voltage.

The B72580T0110K062 is an ideal choice for a wide range of low power applications and is suitable for use in commercial, industrial, automotive, and consumer electronics circuits. Its low capacitance, high surge current capability, and wide operating range offer excellent protection and performance in surge protection applications. In addition, the device can be soldered to a circuit board without additional components, allowing for easier and faster installation.

The specific data is subject to PDF, and the above content is for reference