Allicdata Part #: | B8J2K25E-ND |
Manufacturer Part#: |
B8J2K25E |
Price: | $ 1.95 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 2.25K OHM 8W 5% AXIAL |
More Detail: | 2.25 kOhms ±5% 8W Through Hole Resistor Axial Flam... |
DataSheet: | B8J2K25E Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 1.77188 |
Series: | Brown Devil® 200 |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 2.25 kOhms |
Tolerance: | ±5% |
Power (Watts): | 8W |
Composition: | Wirewound |
Features: | Flame Retardant Coating, Safety |
Temperature Coefficient: | ±260ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.313" Dia x 1.000" L (7.94mm x 25.40mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors, sometimes known as "axial lead resistors" are one of the most widely used components in electronic equipment. A B8J2K25E through hole resistor is a type of resistor that features two metal leads on either side of a resistor body, with a resistor element inside. The leads, body and resistor element are all made from a range of materials, depending on the application and the requirements of the project. They are most commonly used for signal limiting, current limiting, frequency control and device protection.
Due to their simple design, through hole resistors are one of the most commonly used components in circuit assemblies, so understanding their application field and working principles is important in order to use them correctly, and to ensure their success in the application.
The B8J2K25E through hole resistor is a type of metal oxide resistor that features a ceramic body, an alloy element and metal end caps. The resistor body is made from a ceramic material that has been sintered with an oxide layer, and within the body the resistor element is made from a ferro-alloy which has been locked into place. The end caps are usually made of metal such as brass or tin, depending on the application. The two leads are connected to the body and the resistor element using solder, and the solder is heated in order to create a strong connection.
The application field of this type of resistor is wide, and it is typically used in complex power circuits, as it can provide high precision, good temperature range and low thermal resistance. It is ideal for applications such as power semiconductors, DC/DC converters and high power LED applications. It also has excellent stability, noise resistance and wide temperature range.
The working principle of a B8J2K25E through hole resistor is fairly simple; when it is connected to a circuit, current flows through the leads, across the body and the resistor element, and then continues out the other lead. This current produces a small amount of heat, depending on the resistance of the element. This heat is dissipated through the body of the resistor, allowing it to regulate the current and current across the circuit.
When selecting a B8J2K25E through hole resistor it is important to consider several factors, including the current rating, power rating, tolerance, temperature and other parameters. These are all necessary in order to ensure that the resistor is suitable for the application, and that it will perform optimally, with no issues.
In summary, the B8J2K25E through hole resistor is a type of resistor that is commonly used for signal limiting, current limiting, frequency control and device protection. Its application field is wide, and it is especially suited for use in power circuits. Its working principle is relatively simple, and when selecting one it is important to consider several parameters, in order to ensure its success.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
B8J20KE | Ohmite | 2.27 $ | 1000 | RES 20K OHM 8W 5% AXIAL20... |
B8J22K5E | Ohmite | 2.27 $ | 1000 | RES 22.5K OHM 8W 5% AXIAL... |
B8J25KE | Ohmite | 2.27 $ | 1000 | RES 25K OHM 8W 5% AXIAL25... |
B8J2K25E | Ohmite | 1.95 $ | 1000 | RES 2.25K OHM 8W 5% AXIAL... |
B8J2K0 | Ohmite | 2.14 $ | 1000 | RES 2K OHM 8W 5% AXIAL2 k... |
B8J2R0E | Ohmite | 2.14 $ | 1000 | RES 2 OHM 8W 5% AXIAL2 Oh... |
B8J200E | Ohmite | 2.02 $ | 1000 | RES 200 OHM 8W 5% AXIAL20... |
B8J250E | Ohmite | 2.02 $ | 1000 | RES 250 OHM 8W 5% AXIAL25... |
B8J200 | Ohmite | 2.05 $ | 1000 | RES 200 OHM 8W 5% AXIAL20... |
B8J20R | Ohmite | 2.05 $ | 1000 | RES 20 OHM 8W 5% AXIAL20 ... |
B8J250 | Ohmite | 2.05 $ | 1000 | RES 250 OHM 8W 5% AXIAL25... |
B8J25R | Ohmite | 2.05 $ | 1000 | RES 25 OHM 8W 5% AXIAL25 ... |
B8J25RE | Ohmite | 2.07 $ | 1000 | RES 25 OHM 8W 5% AXIAL25 ... |
B8J225E | Ohmite | 2.07 $ | 1000 | RES 225 OHM 8W 5% AXIAL22... |
B8J25K | Ohmite | 2.47 $ | 1000 | RES 25K OHM 8W 5% AXIAL25... |
B8J20K | Ohmite | 2.47 $ | 1000 | RES 20K OHM 8W 5% AXIAL20... |
B8J20RE | Ohmite | 3.0 $ | 6 | RES 20 OHM 8W 5% AXIAL20 ... |
B8J2K0E | Ohmite | 2.83 $ | 19 | RES 2K OHM 8W 5% AXIAL2 k... |
B8J2K5E | Ohmite | 2.83 $ | 74 | RES 2.5K OHM 8W 5% AXIAL2... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...