BB15AH-FC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pushbutton switches are used in a variety of applications for various purposes, but one of the most common and popular types of switch is the BB15AH-FC. This type of switch is specifically used to control the operation of electric motors, allowing the user to start, stop or reverse the motor\'s direction with a simple push of the button. This article will discuss the application field and working principle of the BB15AH-FC.

The BB15AH-FC is a pushbutton switch that is used to control the operation of single-phase electric motors with a power rating from 0.25 horsepower (hp) to 0.5 hp. The switch is designed to control applications in residential, commercial and industrial settings, such as HVAC units, fans, pumps, sprinklers, electric hoists, and garage door openers. It is suitable for use in damp and wet locations.

The BB15AH-FC is a single-pole, single-throw (SPST) switch that is actuated when the button is pressed. The contacts of the switch are normally open, meaning the circuit is disconnected when the switch is not being used. When the button is pressed, the contacts close, allowing electricity to pass through and activate the electric motor. The contacts are held in their closed position until the button is pressed again or until the power is removed.

The switch is equipped with visible-break contacts, which are designed to break the circuit when the switch is maintained in its closed position for too long, protecting the motor from overheating or becoming damaged. The switch also comes with a red reset button, which re-enables the contacts when needed. The BB15AH-FC is cULus listed and UL508A certified for control of motor loads.

The BB15AH-FC is typically installed on motor control panels and other control devices. It can be mounted on the panel surface or in a cutout, and is mounted using two mounting screws. The switch is wired using copper or aluminum wire, and is connected to the power source and the motor ensure the switch is wired correctly. The manufacturer\'s instructions should be followed for proper installation.

In conclusion, the BB15AH-FC is a single-pole, single-throw switch that is used to control the operation of single-phase electric motors with a power rating from 0.25 hp to 0.5 hp. It is designed to control applications in residential, commercial and industrial settings, and is suitable for use in damp and wet locations. It is cULus and UL508A certified, and is typically installed on motor control panels and other control devices. When the button is pressed, the contacts of the switch close, which in turn activate the electric motor.

The specific data is subject to PDF, and the above content is for reference