Allicdata Part #: | BCD48BF030T210A00-ND |
Manufacturer Part#: |
BCD48BF030T210A00 |
Price: | $ 74.17 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Vicor Corporation |
Short Description: | VI CHIP BCM BUS CONV EVAL BRD |
More Detail: | BCM48Bx030y210A00 VI Chip® BCM® DC/DC, Step Down 1... |
DataSheet: | BCD48BF030T210A00 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 66.74850 |
Series: | VI Chip® BCM® |
Part Status: | Active |
Main Purpose: | DC/DC, Step Down |
Outputs and Type: | 1, Isolated |
Power - Output: | 210W |
Voltage - Output: | 3V |
Current - Output: | 80A |
Voltage - Input: | 38 V ~ 55 V |
Regulator Topology: | Buck |
Frequency - Switching: | 1.43MHz |
Board Type: | Fully Populated |
Supplied Contents: | Board(s) |
Utilized IC / Part: | BCM48Bx030y210A00 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The BCD48BF030T210A00 is a type of Evaluation Boards - DC/DC & AC/DC (Off-Line) SMPS. It is a high-performance and cost-effective application mainly used for high resolution applications like for industrial and commercial applications. One primary feature of this application is its ability to provide power with very low power consumption and very high efficiency.
The BCD48BF030T210A00 has been designed around a single-stage active PFC circuit for output power levels between 88W and 240W. The application uses a specially designed active switch to produce significantly increased efficiency and improved transient response. It also features an output voltage over-voltage protection circuit, allowing for robust operation and enhanced system reliability.
The working principle of the application is simple. It incorporates a half-bridge converter composed of an active switch, a diode, and an output filter capacitor. The active switch is driven directly from a DC voltage source, while the diode provides protection against accidental over-voltages. When the active switch is turned on, a current is induced in the primary of the output transformer, which then steps-up the input voltage to an appropriate level. The output voltage is then regulated by the incorporation of a feedback loop, which adjusts the duty cycle of the active switch, depending on the load current. This ensures that a constant output voltage is maintained.
The performance of the BCD48BF030T210A00 is extremely reliable and it offers the user a cost-effective and efficient solution for highly demanding applications. The built-in protection circuit ensures safe operation and the output filter capacitor helps reduce the output ripple, thus providing a clean and consistent power output. All these features together make the BCD48BF030T210A00 an attractive choice for designers in various applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BCD48BH120T120A00 | Vicor Corpor... | 73.74 $ | 1000 | HALF-CHIP BUS CONVERTER E... |
BCD48BF080T240A00 | Vicor Corpor... | 73.74 $ | 1000 | BCM 38/48/55/8.0/240W CUS... |
BCD48BF096T240A00 | Vicor Corpor... | 73.74 $ | 1000 | BCM 38/48/55/9.6/240W CUS... |
BCD48BF120T300A00 | Vicor Corpor... | 73.74 $ | 1000 | BCM 48/12V 300W CUST EVAL... |
BCD48BF160T240A00 | Vicor Corpor... | 73.74 $ | 1000 | BCM 48/16V 240W CUST EVAL... |
BCD48BF240T300A00 | Vicor Corpor... | 73.74 $ | 1000 | BCM2 48/38/55/24/300W CUS... |
BCD48BF320T300A00 | Vicor Corpor... | 73.74 $ | 1000 | BCM48/32V 300W CUST EVALB... |
BCD48BF030T210A00 | Vicor Corpor... | 74.17 $ | 1000 | VI CHIP BCM BUS CONV EVAL... |
BCD48BF480T300A00 | Vicor Corpor... | 74.71 $ | 1000 | BCM48/48V 300W CUST EVALB... |
BCD48BF040T200A00 | Vicor Corpor... | 75.66 $ | 1000 | VI CHIP BCM BUS CONV EVAL... |
EVAL KIT FOR ACT4060ASH-TACT4060A - DC/D...
BOARD EVAL OFFLINE CTLR NCP1337ANCP1337 ...
BOARD EVAL POE FOR SI3402Si3402 - Specia...
EVAL BOARD FOR DCM24AP150T320A50DCM24AP1...
BOARD EVALUATION LM3670MF-1.5LM3670 - DC...
EVAL BOARD QUASI RES 15WVIPER35HD - AC/D...