BCM6123E60E10A5T01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BCM6123E60E10A5T01 is a low-power off-line switching regulator evaluation board from the evaluation boards – DC/DC & AC/DC (Off-Line) SMPS category. The evaluation board is based on the BCM6123E60E10A5T01 IC, a step-down switching regulator with integrated high-side and low-side MOSFETs capable of delivering up to 6A of continuous output current. The board is designed to operate with an input voltage of between 10V and 18V and provides a regulated output voltage of 5V with a 0.8% accuracy. With its integrated MOSFETs, the converter is able to achieve up to 93% efficiency with up to 60kHz of power conversion.

The BCM6123E60E10A5T01 evaluation board offers a wide range of features, such as the ability to dynamically reconfigure the converter to meet a wide range of application requirements. It is capable of operating in constant voltage mode, as well as current limit and power limit modes, and is also equipped with an adjustable over-temperature protection feature. The board also offers a wide input voltage range and a wide range of output current levels, up to 6A, in both step-up and step-down configurations. The evaluation board also includes an adjustable soft-start feature, which helps to minimize inrush current and protect the system from power surges.

The BCM6123E60E10A5T01 evaluation board also features an integrated Safe-Start system, which automatically shuts down the converter if an over-current or over-temperature event is detected. This system allows the user to limit the maximum current drawn from the AC source, and protect the system from short circuits, as well as ensuring safe operation. The board also offers an adjustable frequency control feature, which is used to reduce the switching frequency to reduce EMI and improve efficiency.

The working principle of the BCM6123E60E10A5T01 evaluation board is based on the operation of an AC-DC power converter. An AC-DC power converter is an electrical circuit that is used to convert an alternating current (AC) into a direct current (DC). The AC-DC power converter consists of a rectifier, a filter, and an inverter. The rectifier converts the AC input voltage into a DC output voltage. The filter removes any AC ripple from the DC output voltage, and the inverter converts the DC voltage back into an AC voltage with a suitable frequency.

The BCM6123E60E10A5T01 evaluation board uses an AC-DC converter to power its integrated MOSFET switches, which are used to control the output voltage. The MOSFET switches are connected to the primary winding of a transformer, which is used to step down the input AC voltage into a suitable DC voltage level. The output of the secondary winding of the transformer is then rectified to provide a DC voltage. The rectified output is filtered and regulated to provide a desired DC output voltage. The MOSFET switch then controls the output voltage by controlling the amount of current that flows through the primary winding of the transformer, thus regulating the output voltage.

The BCM6123E60E10A5T01 evaluation board is suitable for a wide range of applications, including industrial, automotive, telecom, and consumer applications. It is ideal for powering low-power DC-DC loads in applications that require a low-cost, efficient, and reliable power supply solution. The board is also well suited for applications that require low temperature operation, as it is capable of operating down to -40°C. With its integrated MOSFETs and adjustable features, the BCM6123E60E10A5T01 evaluation board is the ideal choice for powering low-power DC-DC loads.

The specific data is subject to PDF, and the above content is for reference