BCR16PM-16LH-1#B00

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	800V
Current - On State (It (RMS)) (Max):	16A
Voltage - Gate Trigger (Vgt) (Max):	1.5V
Current - Non Rep. Surge 50, 60Hz (Itsm):	160A @ 60Hz
Current - Gate Trigger (Igt) (Max):	35mA
Configuration:	Single
Operating Temperature:	-40°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack
Supplier Device Package:	TO-220F
Base Part Number:	BCR16-16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs: BCR16PM-16LH-1#B00 application field and working principle

A TRIAC, or triode for alternating current, is a three-layer semiconductor device primarily used for controlling current flow. The acronym TRIAC stands for “triode for alternating current”, while LASCR stands for "Light Activated SCR". The BCR16PM-16LH-1#B00 is a TRIAC and part of the general class of SCRs (silicon-controlled rectifiers).The TRIAC is an electronic component that can control the amount of current flowing in one direction through a circuit. It is a three-terminal device composed of two PN junction diodes, one in series and one in parallel, connected in a triangle shape. Its main purpose is to control the flow of electrical current, either from a low to a high-voltage level or from a high to a low-voltage level. It is used for controlling the amount of current, voltage, or power delivered to an electrical device.The BCR16PM-16LH-1#B00 is a two-channel TRIAC, with a maximum operating voltage of 600 V and a maximum operating current of 16 A. This TRIAC is suitable for use in circuits that require low-voltage (<100 V) and low-current demands. It is often used in the applications of switch mode power supplies (SMPS), switching circuits and motor controls. In the case of SMPS, it is usually used as a power device to switch power off and on, and so can be used to implement phase control.In terms of its working principle, it operates in the same way as a conventional TRIAC. It consists of two main regions: a main "gate" and a "main" anode. This structure allows a voltage to be applied to the gate and when this voltage is above a certain level, called the holding voltage, the main anode will start to conduct. The voltage applied to the gate is what controls the amount of current that flows through the TRIAC. When the voltage on the gate is low, the TRIAC is off and no current flows. When it is high the TRIAC turns on and current will flow.In summary, the BCR16PM-16LH-1#B00 is a TRIAC device suitable for high-voltage and high-current applications. It can also be used for switch mode power supplies, switching circuits and motor control circuits. Its working principle is based on the concept of gate voltage controlling the amount of current that can flow through the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description