BDH105

BDH105 disconnect switch is a three-pole, three-phase, high-performance switch designed for high-voltage, low-amperage applications. It has a separate, isolated switch for each phase. With its single-phase construction, it is easy to install and has low maintenance requirements. The BDH105 switch is designed for applications requiring a high-reliability switch, such as industrial process control, low voltage power distribution systems, and commercial motor control.The BDH105 disconnect switch is built and tested using high-quality components, ensuring its reliability in extreme environmental conditions. It features: IP56 environmental ratings, high-current capacity, and low-contact resistance. The BDH105 has a contact rating of up to 100 amp at 440 volts AC and up to 400 amp at 220 volts AC. It also provides both positive and negative feedback to indicate the switch status.The BDH105 switches are designed to have high electrical performance, reliability, and robustness. Its components are built to provide current-carrying ratings that exceed the normal IEC 60947-1 requirements. Its construction materials are rated to handle the highest forms of voltage, ensuring its ability to withstand a wide range of applications. The contact points are gold-plated to provide necessary protection from corrosion and ensure longer life.The basic working principle of the BDH105 switch is to open or close its contact points when the corresponding control circuit is actuated. When the control circuit is actuated, the contact points of the switch are separated or connected, respectively, and a counter current is generated. The counter current is then measured and used as feedback to determine the switch position. The switch then remains in the new position until an opposite signal is provided to reverse its position. The BDH105 switch is suitable for use in industrial process control applications, low-voltage power distribution systems, and commercial motor control systems. The switch provides reliable protection and current-carrying properties to ensure safe operation and long-term reliability. With its integral modular design, the BDH105 disconnect switch can be integrated into any system design and easily configured for specific applications. The disconnect switch can be connected to other components, such as an over-power and over-current protection system, or a switchgear system for motor control applications. The BDH105 switch is available in various models with different sizes and current ratings. It is designed for switchboards, fuses, and other components that require electrical isolation. The switch also includes spring-loaded contacts that are designed to provide reliable contact closing and opening. The BDH105 also boasts a wide operating temperature range and a high heat dissipation rating.Overall, the BDH105 switch offers a reliable, cost-effective, and easy-to-install alternative to other disconnect switch components. It is an ideal choice for a wide range of applications, including process control, power distribution, and motor control.