BF014G0123J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are electrical components that are used primarily for two causes: to buffer electric fields and to store electric charge. They often feature two highly conductive surfaces that are separated by a thin film of dielectric material and two metal plates, electrodes. These components are made up of two metal plates, stacked in a grid-like pattern and separated by a dielectric film. This type of capacitor is divided into three major categories: Polyester, Polypropylene, and Metallized Film Capacitors. Within each major category, there are sub-categories for size, voltage, and temperature range.

BF014G0123J is a Metallized Film Capacitor, the most frequently used capacitor in the industry. It is constructed as follows - a film of metalized polyester is sandwiched between two thin metal plates, with outgassing holes within the casing of the capacitor. The entire assembly is then sealed, an internal insulating layer is placed between the plates, and the capacitor is ready for use.

Metallized Film Capacitors are used in a variety of applications. These include signal processing, audio and low-frequency processing, switching circuits, power supplies, pulse waveform generation and other power devices. Metallized Film Capacitors are also often used in medical device applications such as heart pacemakers, defibrillators and therapeutic-level defibrillators.

BF014G0123J has a maximum operating voltage of 350VAC, and a maximum temperature of 85°C. For maximum safety, a safety factor of 1.1 must be used when determining the maximum voltage level for operation. The dielectric strength of the capacitor is 7.5KV, and the insulation resistance is 5.0MΩ per 500VDC. This indicates that the capacitor\'s insulation layers can withstand a higher voltage than the standard voltage rating.

BF014G0123J has a typical capacitance of 6nF with a 4% tolerance. This indicates that the capacitance of this type of capacitor is able to hold a steady 6nF within the range of +/- 0.24nF. The capacitance of this type of capacitor is relatively consistent, allowing it to provide reliable service over time. In addition, the capacitor is able to operate at frequencies between 20Hz-20kHz, which makes it suitable for a variety of audio and low-frequency processing applications.

The working principle of a Metallized Film Capacitor is based on capacitance, which is the ability of a dielectric material to store electric charge. When a voltage is applied across the two metal plates, an electric field is created between the two metal plates. This electric field causes a separation of positive and negative charge on either side of the polyester film. This separation of charges creates an electrical field, which causes the current to flow through the capacitor. This current is stored as electrical energy and can be released when the electric field is disrupted by disconnecting the power source. This is how the BF014G0123J Metallized Film Capacitor operates.

It is important to note that the capacitor must be carefully mounted in order to ensure maximum performance. For example, the leads of the capacitor must be insulated from other components in the circuit, and the capacitor must be securely mounted in order to minimize mechanical strain. In addition, the capacitor should be protected from shock and vibration, and should not be exposed to high-temperature environments. Properly handling and storing the capacitor can help extend its lifespan and ensure reliable performance.

In conclusion, BF014G0123J is a Metallized Film Capacitor, a highly versatile capacitor that is used in a variety applications, ranging from signal processing to medical device applications. It has a maximum operating voltage of 350VAC, and a capacitance of 6nF with a 4% tolerance. Additionally, it is able to operate at frequencies between 20Hz-20kHz. Lastly, its working principle is based on capacitance, which is the ability of a dielectric material to store electric charge. When a voltage is applied between the two metal plates, an electric field is created, which causes the current to flow through the capacitor.

The specific data is subject to PDF, and the above content is for reference