BGM681L11E6327XT RF/IF and RFID |
|
Allicdata Part #: | BGM681L11E6327XTTR-ND |
Manufacturer Part#: |
BGM681L11E6327XT |
Price: | $ 1.06 |
Product Category: | RF/IF and RFID |
Manufacturer: | Infineon Technologies |
Short Description: | IC GPS FRONT-END 3.6V TSLP11-1 |
More Detail: | RF Front End 1575MHz GPS TSLP-11 |
DataSheet: | BGM681L11E6327XT Datasheet/PDF |
Quantity: | 5000 |
5000 +: | $ 0.97081 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
RF Type: | GPS |
Frequency: | 1575MHz |
Features: | -- |
Package / Case: | 10-UFDFN Exposed Pad |
Supplier Device Package: | TSLP-11 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
BGM681L11E6327XT is an RF front end module that includes both a Low Noise Amplifier (LNA) and a Power Amplifier (PA). It is a high-performance, low-cost radio module that is ideal for applications that require high levels of operating performance in a small form factor.
BGM681L11E6327XT is ideal for applications that require high levels of operating performance in a small form factor, such as in cellular base station terminals, cellular repeaters, picocell stations, wireless Local Area Networks (WLANs) and wireless Personal Area Network (PANs), Radio Frequency Identification (RFID) devices, GSM handsets and transceivers, and Wi-Fi enabled devices. It is also well-suited for a variety of consumer electronic devices, such as remote control toys, cordless phones, and Low Earth Orbit (LEO) communication systems.
The BGM681L11E6327XT module is based on an advanced design that integrates a LNA and PA on the same module. The core of the module is a high-performance LNA that is able to detect signals in the frequency range of 0.0625-3.8GHz. The output of the LNA is fed into a high-power, high linearity PA with a frequency range of 0.02-3.8GHz, providing a maximum output power of +33dBm. The PA is controlled by the Automatic Level Control (ALC) circuitry that ensures a constant output power over a wide input signal range.
The module is also equipped with an integrated voltage-controlled oscillator (VCO) and switched capacitor filters (SCFs). The SCFs are used to filter out unwanted signals in the radio frequency (RF) spectrum, and to ensure that the module operates in a linear mode, with low intermodulation distortions (IMDs). The VCO provides a wide tuning range, and is also used to regulate the output power.
The BGM681L11E6327XT is an RF front end module that includes both a Low Noise Amplifier (LNA) and a Power Amplifier (PA). It is ideal for a variety of applications, from cellular base station terminals to consumer electronics, and is able to provide high levels of operating performance in a small form factor. The module is based on an advanced design that integrates a LNA and PA on the same module, and is equipped with an integrated voltage-controlled oscillator (VCO) and switched capacitor filters (SCFs).
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BGM681L11E6327XT | Infineon Tec... | 1.06 $ | 5000 | IC GPS FRONT-END 3.6V TSL... |
IC FRONT END MOD 5GHZ WLAN 16QFNRF Front...
MOD TRANSMIT FRONT END 34MCMRF Front End
IC TRANSMITTER/RECEIVER 30MCMRF Front En...
IC RF 802.11B G N2GHZ TX RXRF Front End
IC FEM 2.4GHZ BT 256 QAM 16QFNRF Front E...
MOD FEM 5G PA+LNA+SP2T 16QFNRF Front End...