BGS13SN9E6327XTSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF switches are electronic gateways which allow radio signals to be transmitted from one point to another and provide dynamic network control. BGS13SN9E6327XTSA1 is a one-pole, two-throw (SP2T) RF switch with a high isolation of 40dB and an insertion loss of only 0.9dB at all operating frequencies, from 5 MHz up to 3 GHz. This makes it an excellent choice for Intermediate Frequency (IF) mixing applications, where switching between two input ports is required.

Applications

The BGS13SN9E6327XTSA1 is primarily meant for use in IF mixing applications, where it allows for switching between two input ports. It is also suitable for diversity applications, with one of its uses being in the combination of two signals on different frequency bands in one antenna. Additionally, due to its low distortion and insertion loss, it can be used in both transmitter and receiver RF signal paths.

Working Principle

The BGS13SN9E6327XTSA1 is a SP2T RF switch, which means that it has one pole and two throws. In operation, the two throws (or ports) are connected by a high power switching transistor, which acts as an on and off switch. When the switch is in its off state, the two ports remain isolated from each other with no signal flow. When the switch is in its on state, it provides a low-impedance path between the two ports, allowing the radio signals to pass through without any distortion.

In terms of its electrical characteristics, the BGS13SN9E6327XTSA1 is compatible with 50-Ohm impedance systems, making it compatible with most RF circuits. It also has a high isolation of 40dB and an insertion loss of only 0.9dB, which makes it an ideal choice for IF mixing applications where low distortion and low insertion loss are essential.

Conclusion

The BGS13SN9E6327XTSA1 is a SP2T RF switch designed for applications requiring switching between two ports. It has a high isolation of 40dB and an insertion loss of only 0.9dB, making it ideal for mixing applications. Additionally, due to its low distortion and insertion loss, it is suitable for use in both transmitter and receiver RF signal paths, making it an excellent choice for a variety of RF signal switching applications.

The specific data is subject to PDF, and the above content is for reference