BK/ABC-18-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are components used to prevent the undesired elevation of current, usually higher than specified, in an electrical circuit. It acts as a safety feature by automatically disconnecting the circuit if excessive current flows through it. This protects both the wiring and components from potential damage due to overheating. The BK/ABC-18-R is a type of fuse specifically designed to protect against potentially dangerous currents.

The BK/ABC-18-R fuse is used primarily to protect low voltage motors from current overload. This overload can occur for a variety of reasons such as a mechanical jam in the motor or a surge in the supply voltage. The BK/ABC-18-R fuse is rated for 18 Amps and is rated to trip under a fault current of 4 Amps or higher. The fuse will reset itself automatically after the fault is cleared and the current drops below 4 Amps.

The fuse consists of a metal ribbon which is heated rapidly by the electrical current, causing it to rupture. When it ruptures, it forms an open circuit, thus interrupting the current flow and protecting the motor from further damage. The fuse body is made of a special ammonium phosphate material that is highly heat conductive and helps to quickly dissipate heat away from the fuse.

To ensure reliable protection, the fuse must be properly sized for the current draw of the motor. If the fuse is too small, then it will not be able to withstand the full load of the motor, and may not be able to trip in time before it is damaged. Conversely, if the fuse is too large, then it will take too long to trip in the event of an overload, and may cause extensive damage to the motor before it trips.

In addition to protecting the motor, the BK/ABC-18-R also helps prevent damage to associated electrical components. The presence of the fuse means that any higher current can be quickly detected and interrupted, thus avoiding potential damage to the other components.

The BK/ABC-18-R is an ideal choice for protecting low voltage motors from current overloads, and its reliability and protective capabilities make it an indispensable safety measure in many industrial and consumer applications. The BK/ABC-18-R is simple to install, requires minimal maintenance, and offers superior protection in a cost-effective package.

The specific data is subject to PDF, and the above content is for reference