BNC7T-J-P-GN-ST-EM2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are used in a variety of applications, including radio frequency (RF) transmission and spectrum analysis, and can be used for both analog and digital signals. BNC7T-J-P-GN-ST-EM2 is a type of coaxial connector that is used in these applications. It is a two-piece connector that is designed as an impedance transformer, meaning that it can be used to connect two different types of cables of different impedances. This allows it to be used in applications where it is necessary to match the impedance of two different types of cables.

The BNC7T-J-P-GN-ST-EM2 coaxial connector consists of two parts: a plug and a jack. The plug is the male portion and has a threaded outer shell that is used to secure the plug into the jack. The jack is the female component and has a hole in the center where the plug is inserted. The inner part of the plug has a pin that is used to make contact with the corresponding pin on the jack. The pins have a small spring built into them that allows them to make secure contact with the corresponding pin.

The BNC7T-J-P-GN-ST-EM2 coaxial connector has several advantages over other types of connectors. It has a relatively low insertion loss and a good return loss, making it suitable for high frequency applications. Additionally, its connector impedance is 60 ohms, making it compatible with most transmitters and receivers. Finally, it is a relatively simple design and does not require any complex tools for installation.

The working principle of the BNC7T-J-P-GN-ST-EM2 is based on the concept of impedance matching. The connector is designed to change the impedance of one signal so that it is compatible with the impedance of the other signal. This is accomplished by the pins on the plug and jack, which are designed to transfer the signal from one cable to the other while maintaining the impedance at 60 ohms. The transfer of the signal is accomplished through the use of the pin spring, which ensures that the signal is transferred with minimal losses.

The BNC7T-J-P-GN-ST-EM2 coaxial connector is used in a variety of applications, including radio frequency (RF) transmission and spectrum analysis, and can also be used for both analog and digital signals. Its low insertion loss and good return loss make it suitable for high frequency applications, while its connector impedance of 60 ohms makes it compatible with most transmitters and receivers. Additionally, its relatively simple design makes it easy to install without any specialized tools.

The specific data is subject to PDF, and the above content is for reference